User Tools (System Settings)
Accessing User Tools (System Settings)
This section is for key operators in
charge of this machine.
User Tools allow you to change or set
defaults.
Note
❒ Operations for system settings dif-
fer from normal operations. Al-
3
ways quit User Tools when you
have finished. See p.27 "Quitting
User Tools".
❒ Any changes you make with User
Tools remain in effect even if the
main power switch or operation
switch is turned off, or the { { { { Clear
Modes} } } } key is pressed.
Changing Default Settings
Note
❒ If a key operator code is already
set, the key operator code entry
display appears. Enter the key op-
erator code, and then press the
{ { { { OK} } } } key. See p.33 "Key Operator
Code".
A A A A
Press the { { { { User Tools/Counter} } } } key.
26
B B B B
Select [System Settings] using { { { { U U U U } } } }
or { { { { T T T T } } } } , and then press the { { { { OK} } } }
key.
C C C C
Select the menu using { { { { U U U U } } } } or { { { { T T T T } } } } ,
and then press the { { { { OK} } } } key.
Reference
p.23 "User Tools Menu (System
Settings)".
D D D D
Select the item using { { { { U U U U } } } } or { { { { T T T T } } } } ,
and then press the { { { { OK} } } } key.
E E E E
Change settings by following in-
structions on the display, and
then press the { { { { OK} } } } key.
Note
❒ To discontinue the operation
and return to the initial display,
press the { { { { User Tools/Counter} } } }
ABU205S
key.