Accessing User Tools (System Settings); Changing Default Settings - Ricoh DSm415 Operating Instructions Manual

User Tools (System Settings)

Accessing User Tools (System Settings)

This section is for key operators in
charge of this machine.
User Tools allow you to change or set
defaults.
Note
❒ Operations for system settings dif-
fer from normal operations. Al-
3
ways quit User Tools when you
have finished. See p.27 "Quitting
User Tools".
❒ Any changes you make with User
Tools remain in effect even if the
main power switch or operation
switch is turned off, or the { { { { Clear
Modes} } } } key is pressed.

Changing Default Settings

Note
❒ If a key operator code is already
set, the key operator code entry
display appears. Enter the key op-
erator code, and then press the
{ { { { OK} } } } key. See p.33 "Key Operator
Code".
A A A A
Press the { { { { User Tools/Counter} } } } key.
26
B B B B
Select [System Settings] using { { { { U U U U } } } }
or { { { { T T T T } } } } , and then press the { { { { OK} } } }
key.
C C C C
Select the menu using { { { { U U U U } } } } or { { { { T T T T } } } } ,
and then press the { { { { OK} } } } key.
Reference
p.23 "User Tools Menu (System
Settings)".
D D D D
Select the item using { { { { U U U U } } } } or { { { { T T T T } } } } ,
and then press the { { { { OK} } } } key.
E E E E
Change settings by following in-
structions on the display, and
then press the { { { { OK} } } } key.
Note
❒ To discontinue the operation
and return to the initial display,
press the { { { { User Tools/Counter} } } }
ABU205S
key.