Table of Contents
Advertisement
Bell105sysGB-FIN_FM.book Page 5 Wednesday, April 19, 2000 11:13 AM
Accessing User Tools (System Settings)
This section is for the key operators in charge of this machine. With User Tools,
you can change the machine's default settings.
Preparation
After using User Tools, be sure to exit them to return to Copy mode.
The key selected is highlighted.
The settings are not canceled even if the main power switch or operation
switch is turned off or the {Clear Modes} or {Energy Saver} key is pressed.
Reference
For information on Copy User Tools, see the "Copy Reference" manual.
A
Press the {User Tools} key.
The User Tools Main Menu appears.
B
Press the[System Settings] key.
The system settings menu appears.
Accessing User Tools (System Settings)
1
5
Advertisement
Table of Contents
