Accessing User Tools (System Settings)
This section is for administrators in charge of this machine. User Tools allow you to change or set
defaults.
• Operations for system settings differ from normal operations. Always quit User Tools when you
have finished. See page 26 "Quitting User Tools".
• Any changes you make with User Tools remain in effect even if the main power switch or operation
switch is turned off, or the [Clear Modes] key is pressed.
Changing Default Settings
• If an administrator code is already set, the administrator code entry display appears. Enter the
administrator code, and then press the [OK] key. See page 30 "Administrator Tools".
1.
Press the [User Tools/Counter] key.
2.
Select [System Settings] using the [ ] or [ ] key, and then press the [OK] key.
CUA023
Accessing User Tools (System Settings)
25