The inquiry string will vary depending on the method that was selected
for the previous infected object detected. The general format for the
dialog is:
Actions —
<Action_1> (OK/<Action_2>/<Action_3>/Cancel/Stop)
where:
To select the default method you may press the key with its capital
letter or the <O> key (that means OK).
To select one of the other methods press the key with its capital letter.
For example, to disInfect the object you must press
the I key.
$"
I f your system sector is infected (Boot, MBR, Partition Table),
and you selected to disInfect them or Delete, Scanner will display the
following warning:
Treatment of sectors is a risky operation! We
recommend you to make a complete backup of your
drive. Proceed with treatment now? - Yes/No
To confirm the action type <Y> and press <E
<N> and press <E
disInfect—try to disinfect the object; the virus will be
deleted and the object will be restored to its virus-free
state, close to the original;
Delete—delete the object;
Cancel—ignore the object and continue with checking;
Stop—abort the check.
<Action_1> is the default method suggested. It may be
one of the following three actions: Report only,
disInfect or Delete;
<Action_2> and <Action_3> are the other two
methods of the three listed above. The Cancel and
Stop commands are always at the end of the string.
>.
NTER
NTER
29
29
29
29
S C A N N E R
>. To cancel it type
Need help?
Do you have a question about the ANTI-VIRUS - FOR FREEBSD-OPENBSD-BSDI FILE SERVER and is the answer not in the manual?