Saving The Performance Report - KAPERSKY ANTI-VIRUS - FOR FREEBSD-OPENBSD-BSDI FILE SERVER User Manual

I N S P E C T O R
%"
Solution: To do this, enter the following strings in the Inspector start-up
command line:
./kavinspector –g[=base_documents] /documents –r– –da2d
–dc –a[=var/run] –s[=base_documents]
12.2.4. Saving the performance
report
Inspector can save the performance report to the system log or a separate
file. You can define the reporting settings by using the following switches in
the Inspector command line:
-w[t][a][-][+][=filename]
This switch logs the performance report to the defined file (the default
file is report.txt).
If the character a is defined in the switch, the report will be appended to
the contents of filename, the character t overwrites the report with a new
one. If the character + is defined, extra information will be included in
the report heading. The character – disables the extra information in
the report heading.
-ws[-]
This switch logs the performance report in the system log.
If you want to add some debugging data including information about the
files that have not been changed since the program was last started, etc.,
use the switch –m in the Inspector command line.
154 154
154 154