HP Integrity rx2800 - i2 User Manual page 80

Parameter
CMAMGMTSTATIONRWCOMM
STR
CMAMGMTSTATIONROIPOR
DNS
CMAMGMTSTATIONROCOMM
STR
CMADEFTRAPCOMMSTR
CMATRAPDESTINATIONCO
MMSTR
CMATRAPDESTINATIONIP
ORDNS
CMASYSCONTACT
CMASYSLOCATION
CMASTARTWEBAGENT
CMASTARTSTORAGEAGENT
CMASTARTNICAGENT
CMANOTAINTEDKERNEL
Description
only.)
This parameter enables you to specify an SNMP
read/write community string for a system with
read/write access that serves as a management
station. You can specify multiple strings
separated by a space. (Applies to Linux PSP
only.)
This parameter enables you to specify the IP
address or DNS host name of a system with
read-only access to serve as a management
station. You can specify multiple locations
separated by a space. (Applies to Linux PSP
only.)
This parameter enables you to specify an SNMP
read/write community string for a system with
read-only access that serves as a management
station. You can specify multiple strings
separated by a space. (Applies to Linux PSP
only.)
This parameter enables you to set a default
SNMP community string for traps. (Applies to
Linux PSP only.)
This parameter enables you to specify the SNMP
destination trap community string. (Applies to
Linux PSP only.)
This parameter enables you to specify the IP
address or DNS host name of a server as a
destination for SNMP traps, such as Systems
Insight Manager. (Applies to Linux PSP only.)
This parameter enables you to specify a person
or phone number for administration of this
system. (Applies to Linux PSP only.)
This parameter enables you to designate the
location of this system. (Applies to Linux PSP
only.)
This parameter determines whether the HP
Insight Systems Manager Web Agent is started
when the health application loads. (Applies to
Linux PSP only.)
This parameter determines whether the HP
Insight Systems Manager Storage Agent is
started when the health application loads.
(Applies to Linux PSP only.)
This parameter determines whether the HP
Insight Systems Manager NIC agent is started.
(Applies to Linux PSP only).
This parameter determines whether the HP Lights-
Out management driver is started when the
Possible values
SNMP read/write
community string
IP address, DNS name
SNMP read/write
community string
SNMP community string
SNMP trap destination
IP address, DNS name
String value
String value
•
YES (start the web
agent)
•
NO (do not start the
web agent)
•
YES (start the storage
agent)
•
NO (do not start the
storage agent)
•
YES (start the web
agent)
•
NO (do not start the
web agent)
•
YES (start the HP
Lights-Out
Scripted deployment 80