Deploying Firmware Using The Hp Smart Update Firmware - Hp Integrity Bl860C/Bl870C/Bl890C I2 Servers Bundles - HP Integrity rx2800 - i2 User Manual

If the TPM is detected and enabled with Option
ROM Measuring, the installation is silent; the
/tpmbypass switch is not given, and any firmware
updated must be applied to the server.
If the TPM is detected and enabled, the
installation is silent, and the /tpmbypass switch is
supplied.
Other scenarios do not affect the normal installation procedure.
Deploying firmware using the HP Smart Update Firmware - HP
Integrity BL860c/BL870c/BL890c i2 Servers Bundles
You can only deploy this firmware in HP SUM, included in their respective Windows and Linux bundles.
For supported HP SUM versions, see "Support and Limitations
11, "Support and limitations of HP
Deploying firmware to the HP Integrity BL860c/BL870c/BL890c i2 Servers is done remotely and is the
same as deploying other firmware like OA or VC with the following exceptions:
•
You must specify the IP address of the iLO-3 MP on the server as the target to be updated.
•
On the Select Items to be Installed screen, you must choose whether you want to Upload and
Activate or Upload but Do Not Activate. If you choose not to activate immediately, the firmware is
only updated when the server is rebooted.
NOTE:
components from ftp.hp.com, as these components are not in the catalog on the HP FTP site.
NOTE:
firmware to the HP Integrity BL860c/BL870c/BL890c i2 Servers.
HP SUM supported firmware for HP Integrity servers
Component
Online System ROM
FPGA firmware
iLO-3 MP firmware
Power Monitor firmware
SUM" on page 11)".
In HP Integrity servers, HP SUM does not support the ability to download the latest
Use the version of HP SUM that comes with the Integrity Bundle when deploying the
No pop-up warning appears. A new log file is
generated
(%systemdrive%\cpqsystem\log\cpqstub.log).
Because the installation is silent, the installation is
terminated and cannot continue.
The installation occurs.
("Obtaining the HP SUM
Supported
Yes
Yes
Yes
Yes
utility" on page
Introduction 23