Component Selection Pane - HP Integrity rx2800 - i2 User Manual

NOTE:
Any value under a full minute, 59 seconds or less, will be rounded to the next minute for
Linux.
Make any changes, and click OK.
NOTE:
BL860c/BL870c/BL890c i2 Servers with HP SUM. HP SUM will reboot the server
automatically during the firmware update process when the user has selected Upload and
Activate. Checking any other reboot options or setting a reboot delay is not applicable.

Component selection pane

The component selection pane of the Select Items to be Installed screen displays (by component number
order, unless a dependency causes the installation order to change) components available for installation
based on your server and hardware options. HP SUM verifies each component for dependencies, if the
component is already installed on the system, or if it requires a reboot after installation. Items available
for installation are selected by default. You can deselect any components you do not want to install.
The component selection pane is divided into the following columns:
•
Product—Specifies the name of the component, version number, new component version number,
and the criticality status of the component updates. To view the component version history, click the
new version number. If a component is retrieved from ftp.hp.com, it has an HP icon next to it. For
Linux RPMs, the operating system and system architecture are listed.
Criticality Icon
NOTE:
information is not available to HP SUM.
•
Status—Displays the status of the component.
Icon Text
Ready for installation
Not selected for
installation
Already up-to-date
No device driver
installed
In Linux, the Reboot Delay time is automatically converted from seconds to minutes.
The reboot options do not apply when deploying firmware to HP Integrity
Text Description
Critical HP requires users to update to this component version immediately.
Recommende HP recommends that users update to this component version at their
d earliest convenience.
Optional Update to this component version if their system is affected by one of
the documented fixes or if they want to utilize any of the enhanced
functionality provided by this version.
Unknown Component status is not available.
All Linux RPMs have the Unknown criticality icon
Description
The component is ready for installation.
The component has not been selected for installation.
The component is already up-to-date. To downgrade or rewrite a
component, click Installation Options.
The firmware devices supported by the components in this section are
detected on the system but require a device driver. Install the device
driver.
, because the RPM update
HP SUM User Interface 38