HP Integrity rx2800 - i2 User Manual page 79

Parameter
USEPROXYSCRIPT
DELETEINPUTFILE
ONFAILEDDEPENDENCY
HOST
UID
PWD
LOGFILENAME
CMALOCALHOSTRWCOMMST
R
CMALOCALHOSTROCOMMST
R
CMAMGMTSTATIONRWIPOR
DNS
Description
apply to Integrity Servers.
This parameter enables the inclusion of a proxy
script to access the HP FTP site
(ftp://ftp.hp.com). This parameter does not
apply to Integrity Servers.
This parameter enables you to instruct HP SUM
to delete the input file after it has been read in.
This parameter instructs HP SUM how to proceed
when a component has a failed dependency.
The default of OmitHost causes the host to be
put in a failure state and no install is attempted
on it.
OmitComponent clears the affected
components and proceeds with any updates that
do not have dependency failures. Force attempts
all updates, even if they have dependency
failures.
This parameter is the IP address or the DNS
name of a remote server, remote iLO NIC port,
Virtual Connect Ethernet or Fibre Channel
Module for c-Class BladeSystem, or BladeSystem
Onboard Administrator.
When two Onboard Administrators are in an
enclosure, this parameter is the active Onboard
Administrator. When specifying the IP address,
you can use either the IPv4 or IPv6 format.
This parameter specifies an already defined
group name in the HP SUM GUI.
This parameter enables you to log in to the
target hosts with your user ID.
This parameter enables you to use the password
for the user ID specified in the UID.
The password is used to log in to target hosts.
This parameter enables you to set the name of
the log file generated by HP SUM to something
other than the default of
/var/log/hppldu.log. The path must
already exist or the log file remains the default
file name.
This parameter enables you to specify an SNMP
read/write community string for local host
access. (Applies to Linux PSP only.)
This parameter enables you to specify an SNMP
read-only community string for local host access.
(Applies to Linux PSP only.)
This parameter enables you to specify the IP
address or DNS host name of a system with
read/write access to serve as a management
station. You can specify multiple locations
separated by a space. (Applies to Linux PSP
Possible values
Web URL (for example,
autoproxy.com)
YES, NO (default)
OmitHost (default),
OmitComponent, Force
IP address, DNS name
<username>
<password>
Log file name
SNMP read/write
community string
SNMP read-only
community string
IP address, DNS name
Scripted deployment 79