Hp Sum Supported Firmware For Hp Proliant Servers - HP Integrity rx2800 - i2 User Manual

IMPORTANT:
backup of the target server is available in the event the deployment procedure fails.
For more information about deploying firmware on HP ProLiant servers, see the HP Smart Update
Firmware DVD User Guide on the HP website
(http://h20000.www2.hp.com/bizsupport/TechSupport/DocumentIndex.jsp?contentType=SupportManu
al&lang=en&cc=us&docIndexId=64179&taskId=101&prodTypeId=18964&prodSeriesId=345557).
NOTE:
for HP Integrity BL860c/BL870c/BL890c i2 Servers.

HP SUM supported firmware for HP ProLiant servers

Component
HP ProLiant ML/DL/SL series System ROM
HP Workstation WS460c G6 Blade ROM
HP ProLiant Blade Servers ROM
HP ProLiant 100-series Servers ROM
iLO 2 firmware
iLO 3 firmware
LO-100 firmware
Broadcom NIC firmware
Intel® NIC firmware
QLogic NIC firmware
Mellanox NIC firmware
Power Management Controller firmware
Smart Array Controller firmware
SAS and SATA hard drive firmware behind Smart Array
controllers
SAS and SATA hard drive firmware behind non-Smart Array
controllers
Emulex, QLogic, and Brocade Fibre Channel Host Bus Adapter
firmware
Tape blade firmware
Virtual Connect firmware
HP StorageWorks 600 Modular Disk System (MDS600)
HP 3Gb SAS BL Switch firmware
Onboard Administrator Firmware
Before deploying firmware updates to a target server, be sure that a recent
Currently, HP SUM cannot be used to deploy firmware on HP Integrity servers except
3
3
1
4
Supported
Yes
Yes, offline only
Yes
Yes
Yes, local and remote
Yes, local and remote
Yes
Yes
No
Yes, offline only
Yes
Yes
Yes
Yes
No
Yes, offline only
Yes
Yes, online only
Yes, offline only
2
Yes, online only
Yes, online only
Introduction 17