Updating Firmware On Hp Integrity Bl860C/Bl870C/Bl890C I2 Servers - HP Integrity rx2800 - i2 User Manual

Icon Text
Host Skipped Due to
Existing HP SUM
Session
Action Required
Discovery Failed
NOTE:
column.
To zoom in to single host selections, click View Host on the Select Items to be Installed screen. The
Selections for Single Host screen appears.
To set single-host selections, proceed as described in "Selecting Components to Install (on page 34)."
After setting the single-host selections for all hosts to be updated, on the Select Items to be Installed screen,
to proceed with the installation, click Install.
Updating Firmware on HP Integrity BL860c/BL870c/BL890c i2
Servers
One firmware package for the HP Integrity BL860c/BL870c/BL890c i2 Servers includes System Firmware
which requires a reboot to activate the firmware. To activate and configure the firmware, select Configure
Now, and then select one of the following options:
•
Upload and Activate—(Default selection). After the component is uploaded to the server which is up
and running, HP SUM shuts down and restarts the server to activate the system firmware
immediately.
Description
The host is skipped due to an existing HP Smart Update Manager
session.
The host is not ready for installation. Click View Host for additional
information.
The host is not ready for installation. The detection of installed hardware,
software, and firmware has failed.
The default reboot behavior after updates are installed might also appear in the Status
HP SUM User Interface 60