Testing The System - Dish Network Solo 351 User Manual

Chapter 3
Using the System

Testing the System

Starting a Test
Telephone Connection Test
Page 82
5. Press the POUND (#) button.
The TV mode button flashes three times.
6. Press the SAT mode button.
7. Press the plus (+) and minus (-) sides of the
VOLUME button.
The TV's volume changes and the TV mode button
lights instead of the AUX mode button.
1. Press the MENU button.
2. Select
System Setup
3. Select .
Diagnostics
This test checks that the receiver telephone connection is correct. Select the
option to begin the test. The receiver displays a message asking
Connection
you to wait until the test is done.
• If the telephone connection is correct, the receiver displays a
message.
Connection OK
• If the receiver highlights the
the receiver can make a toll-free call to the Customer Service Center.
The receiver displays a message asking you to wait until the call is done.
When the call is done, select the
.
option, select the
Done
option to exit the test menu.
Done
Phone
option so
Dial Out