Setting Up A Manual Event Timer - Dish Network Solo 351 User Manual

Chapter 3
Using the System

Setting Up a Manual Event Timer

Overlapping Timers
Page 54
1. Press the MENU button.
2. Select the option.
Timers
3. Select the option. The receiver displays the
Create
menu.
Event Timer
4. Select a
Timer Type
: VCR timers are available through TV1 menus only.
Note
5. Select a
Timer Frequency
6. Select a channel by doing one of the following:
Highlight a channel using the UP or DOWN ARROW button.
•
Then, press the SELECT button.
• Enter a channel number using the NUMBER PAD buttons.
7. Select the
Edit Time
menu.
Manual Timer
8. Use the NUMBER PAD buttons to enter the
selecting AM or PM) and the
PM).
9. Use the NUMBER PAD buttons to enter the
10. Select the
Create Timer
11. To create another event timer, do one of the following:
• Select the
Create
• If you do not want to create another event timer, press the CANCEL
button.
: You cannot set a manual event timer for a pay per view event.
Note
If you try to create event timers for overlapping programs, the receiver
displays a screen with the dates and times of both programs. The receiver
also displays this screen if a program time has changed, causing one timer to
overlap another. You must delete, edit, or skip one of the timers.
option.
option.
option. The receiver displays the
, (this includes selecting AM or
End Time
option.
option again.
Create a Manual
Set Date/Time
(this includes
Start Time
.
Date
for