Axis 24HUM Administration Manual page 16

14 Installation
Important!
When installing your AXIS 2400/2401, do not use the default or the IP address featured as examples
within this document. Always consult your Network Administrator before assigning an IP address.
Using the AXIS IP Installer
The AXIS IP Installer is a Windows 95/98 & NT program that simplifies the procedure for setting
IP addresses within Axis' networking products; it also allows you to conveniently access the home
Web page of any Axis ThinServer connected to your network. The program is available on the
AXIS Online CD and from Axis' Websites at http://cctv.axis.com/ and http://www.axis.com/
Installing the AXIS IP Installer:
1. On the AXIS Online CD, click on the Software button.
2. Select the AXIS IP Installer and click Install. The AXIS IP Installer - Setup dialog is displayed
on the screen.
3. Follow the instructions as they appear on the screen.
4. Click Finish to complete the setup.
Setting the IP Address with AXIS IP Installer:
1. Run the AXIS IP Installer from the Start menu. The AXIS IP Installer dialog is displayed on
the screen.
2. Restart your camera server.
3. Select the serial number of your camera server in the list. The serial number is identical to the
Ethernet address of the unit.
4. Enter the desired IP address. Click Set IP address. The IP address will now be set.
5. To access the home page of the camera server, click Home page of selected Axis-server... You
can now configure the video server according to your requirements.
6. Click OK to exit the program.
For more help during the installation of the IP address, click Help or F1.
AXIS 2400/2401 Administration Manual