Axis 24HUM Administration Manual page 73

AXIS 2400/2401 Administration Manual
$d
The current day of the month in the range 01-31.
$n
The current month in the range 01-12.
$y
The current year without the century in the range 00-99.
$Y
The current year including the century.
$rS-E
Inserts an index number starting from number
number E. If you leave out number
Note: The
rS-E
Specifies a temporary name for the destination. This is to prevent someone else from
-temp
accidentally reading the file during the download.
Specifies the time interval within which the command should be repeated and used together
-loop
with the time attribute. If omitted, there will be no delay between repeated transfers.
Format:
h<hours>m<minutes>s<seconds>,
. Optional.
second>
Specifies the total time the command should loop. Used
-time
together with the loop attribute. If omitted, the ftp command will be issued only once.
Format: h
<hours>m<minutes>s<seconds>
Specifies the camera source, i.e. 1 - 4. If this is omitted, video camera source 1 is used as
-cam
default.
-buffer
Specifies the buffer type, e.g.
if is set to
-src
Additional Options
In addition to the options described above, the following optional settings are also available:
-ctrlport
Specifies the TCP port number in the range [0..65534] to be used as the control port for the
FTP server.
-dataport
Specifies the TCP port number in the range [0..65534] to be used as data port for the FTP
server.
Specifies the timeout, i.e. the FTP session will terminate when the specified time limit has
-to
expired. Format:
E
substitution can be used with the first destination file only.
fullsize.jpg
images/buffer.jpg
h<hours>m<minutes>s<seconds>
Appendix H-The Programming Script
through all the numbers including the
S
, it will be interpreted as a very large number.
or
fps <approximate frames per
. Optional.
,
halfsize.jpg
.
.
or . Only valid
hugesize.jpg
71