Using The Menus - Dish Network 512 User Manual

once and then all four device mode buttons to flash once.
3. If you see the
System Info
screen. You have recovered the video image from your satellite receiver.
4. If you do not see the
have recovered the video image from your satellite receiver.
: Press any remote control button other than the RECOVER button to
Note
end this procedure.
: If the RECOVER button is not programmed to a specific channel,
Note
the RECOVER button will first try to tune your TV to channel 3, then
channel 4, and then other video inputs with each press of the RECOVER
button. You may need to press the RECOVER button many times to
recover the video image from your satellite receiver. If the RECOVER
button is programmed to a specific channel (see page 26), the RECOVER
button will tune the TV to the specific channel.
Use these buttons to record or for play back of a DVR program or event. See
Using the DVR Features on page 64 for details.
PIP Button
Press the PIP button to open the
press this button again. Press the button a third time to close the
Swap Button
Press the SWAP button to swap the video image in the main display with the
video image in the
Position Button
Press the POSITION button to move the
the TV screen. Each press of this button move the

Using the Menus

The menus make using the receiver's features and selecting programs to watch
quick and easy. Features accessed by using the menus include setting parental
controls and locks, choosing a program or event, and creating a Favorites list.
screen, press the SELECT button to close the
screen, repeat steps 2 and 3 until you
System Info
DVR Buttons
window. To make the
PIP
window.
PIP
PIP
window larger,
PIP
window.
PIP
window to different positions on
window.
PIP
Using the Menus
Page 43