Connecting Wires To Terminals - Kenwood KDC-7027 Instruction Manual

Connecting Wires to Terminals

Antenna Conversion Adaptor (ISO–JASO) (Accessory3)
FM/AM
antenna input
To External Display/
Steering remote
Fuse(10A)
Wiring harness
(Accessory1)
Battery wire (Yellow)
Ignition wire (Red)
See next page
A –7 Pin (Red)
A–4 Pin (Yellow)
Connector A
Connector B
Antenna Cord (ISO)
External amplifier control wire
(Pink / Black)
TEL mute wire (Brown)
If no connections are made, do
not let the cable come out from
the tab.
Power control/ Motor antenna
control wire (Blue/White)
8 6 4 2
7 5 3 1
8 6 4 2
7 5 3 1
Rear right output (Red)/
Subwoofer right output (Red)
Rear left output (White)/
Subwoofer left output (White)
Front right output (Red)
Front left output (White)
AUX right input (Red)
AUX left input (White)
To KENWOOD disc changer/
GSM hands free unit/
External optional accessory
To connect these leads, refer to the
relevant instruction manuals.
To "EXT.AMP.CONT. " terminal of the
amplifier having the external amp
EXT.CONT
control function.
Connect to the terminal that
is grounded when either the
telephone rings or during
TEL MUTE
conversation.
To connect the KENWOOD
navigation system, consult
your navigation manual.
Connect either to the power control
terminal when using the optional
P.CONT power amplifier, or to the antenna
ANT.CONT control terminal in the vehicle.
39
|
English