Related Manuals for Kenwood KDC-PS9070R
Summary of Contents for Kenwood KDC-PS9070R
- Page 1 KDC-PS9070R CD-RECEIVER INSTRUCTION MANUAL KDC-8070R KDC-8070W KDC-7070R COMPACT DIGITAL AUDIO © B64-1396-00 (EY)
-
Page 2: Table Of Contents
Local Seek Function ...11 Monaural Reception ...11 Auto Memory Entry...12 Station Preset Memory ...12 Preset station seek with Programme service name ...12 Kenwood intelligent Twin IF (K2I) ...13 RDS features RDS (Radio Data System) ...14 EON (Enhanced Other Network)...14 Alarm...14 AF (Alternative Frequency) Function ...14... -
Page 3: Safety Precautions
• If the unit starts to emit smoke or strange smells, turn off the power immediately and consult your Kenwood dealer. • Make sure not to get your fingers caught between the faceplate and the unit. - Page 4 RESET button is pressed. If the unit still fails to operate properly after the RESET button has been pressed, contact your local KENWOOD dealer for assistance. • Press the reset button if the CD auto changer is first controlled and operates incorrectly.
-
Page 5: Handling Compact Discs
Handling Compact discs Playing a CD that is dirty, scratched or warped can cause the sound to skip and the unit to operate incorrectly, resulting in worsened sound quality. Take the following precautions to prevent your CDs from getting scratched or damaged. Handling CDs •... -
Page 6: Basic Operations
Basic operations SRC/ POWER OFF 44W 4 LOUD SCAN D.SCAN ATT/LOUD KDC-PS9070R LOUD indicator KDC-8070R/8070W/7070R ATT indicator LOUD indicator Power ¢ You can help prevent theft of the unit by reversing the faceplate so that the control panel cannot be seen, hiding the unit, and shutting off the audio. -
Page 7: Volume
• Whilst the control panel is moving, pressing the buttons will not have any effect. Do not try to press the buttons on the control panel as the faceplate is moving, as excessive force may damage the unit. • During the forced closing of the unit (i.e., having the unit left closed whilst ignition is turned on), the faceplate will not open no matter how often the ignition is turned on or off, unless “Manual Open Switch”... -
Page 8: Menu System
Time adjustment mode entered In AUX mode In FM reception of Tuner mode In FM, CD, or External disc control mode Except in AMband KDC-PS9070R Only KDC-8070R/8070W/7070R Only In Tuner mode KDC-8070R/8070W Only NOTE • Make sure to end the menu mode when finished. -
Page 9: Attenuator
Tuner mode CD mode External disc control mode AUX mode NOTE • The mode switches to the next mode from any mode which cannot be used. • The external disc control mode will differ depending on the unit that is connected. •... -
Page 10: Tuner Features
Tuner features 44W 4 LOUD SCAN D.SCN M.RDM #1-6 KDC-PS9070R Frequency Character Band display Preset station number KDC-8070R/8070W/7070R Frequency Band display ST indicator AUTO indicator ¢ Selecting Tuning Mode You can choose from three tuning modes: auto seek, preset station seek, and manual. The “AUTO 1” indicator lights up when auto seek tuning is selected, and the “AUTO 2”... -
Page 11: Local Seek Function
lowest number). NOTE If the frequencies stored at the preset numbers receive stations which were not originally memorized when traveling long distances, the preset number is not displayed. In such cases, pressing the 4/¢ button to use preset station seek will receive channel 1. -
Page 12: Auto Memory Entry
Tuner features Auto Memory Entry You can automatically store all the receivable frequencies in the band currently being listened to, and then recall them with the touch of a button later. This function is especially useful when you are travelling and do not know what stations are available. -
Page 13: Kenwood Intelligent Twin If (K2I)
Cancelling mode during input: Press the DNPP button. The seek mode is cancelled. Kenwood intelligent Twin IF (K2I) When the frequency of another station is too close to that of the station currently being listened to, interfering with proper reception, this function automatically narrows the range of received frequencies to prevent such interference. -
Page 14: Rds Features Rds (Radio Data System)
RDS features RDS (Radio Data System) RDS is a digital information system that lets you receive signals besides those of regular radio programmes, such as network information being transmitted from radio stations. When listening to an RDS station (ie, a station with RDS capability), the programme service name of the station is displayed along with the frequency, advising you quickly which station is being received. -
Page 15: Traffic Information Function
Turning Region Restrict Function On/Off: Hold down the MENU button for one second or more. "MENU" is displayed and the menu mode is turned on. Press the ¢ button repeatedly until the Region restrict function appears in the display. Press the 4 button to search in the other direction. The function setting is indicated by "Regional / REG ON"... -
Page 16: Auto Tp Seek Function
RDS features Auto TP Seek Function When the TI function is on and poor reception conditions are experienced when listening to a traffic information station, another traffic information station with better reception will be searched for automatically. This function is on, when unit is first powered on. -
Page 17: Text Scroll
60MIN 70MIN 80MIN 90MIN When you select the news interruption timeout interval, the News function turns on and the NEWS indicator lights up. When a news bulletin is received, "NEWS" will be displayed and reception will begin at the preset volume. NOTE If you choose the "20MIN"... -
Page 18: Radio Text
RDS features Radio Text You can display textual information being transmitted by RDS stations. Turning on Radio Text Display Mode: Pressing the DISP button switches the display as follows. Select the Radio Text Display mode. Programme Service name Radio text NOTE If the RDS station currently tuned to is transmitting no text whilst the Radio Text Display mode is turned on, "NO TEXT"... -
Page 19: Cd/External Disc Control Features
Cancelling Programme Type Function During Its Operation: Press the 38(PTY) button. CD/External disc control features DISP/NAME.S 44W 4 LOUD SCAN D.SCN D.SCN SCAN RDM KDC-PS9070R Track number Mode display KDC-8070R/8070W/7070R Track number ¢ indicator — 19 — DISC (EJECT) DISC... -
Page 20: Playing Cds
CD/External disc control features When a unit equipped with an O-N switch is to be connected, please also see the instruction manual of this unit. Set the O-N switch to "N". "N"-operation will be set. When a unit that is not equipped with an O-N switch, or the changer switching unit "KCA-S200"... -
Page 21: Text / Title Scroll
• "CD2"...when a CD player is connected • "DISC"...when a disc changer is connected • "DISC-1", "DISC-2"...when two disc changers are connected Pausing and Restarting Disc Play: Press the 38 button to make the disc pause. Press the same button again to start play again. NOTE •... -
Page 22: Track Search
CD/External disc control features Track Search Search forwards or backwards through the tracks on the disc until you reach the one that you want to listen to. Making a Reverse Track Search: Press the 4 button to display the desired track number. Press once to search back to the beginning of the current track, twice to search back to the beginning of the previous track, and so forth. -
Page 23: Disc Scan
The track number currently being heard blinks in the display. Stopping to Listen to the Track Being Scanned: Press the 38 or SCAN button again to stop the scan and keep on listening to a track normally. NOTE • The track scan function is cancelled when you stop playing a disc. -
Page 24: Magazine Random Play
CD/External disc control features Magazine Random Play Function of disc changers) Play the tracks on all the discs in the disc changer in random order. Press the M.RDM button to switch the magazine random play function on and off. "MRDM ON / M-Random ON" is displayed when magazine random play is turned on. - Page 25 Please see your disc changer manual for details. Up to 8 (KDC-PS9070R) / 12 (KDC-8070R/8070W/7070R) characters and 30 CDs can be registered with this unit. • Discs are identified by their total length and number of tracks. If...
-
Page 26: Disc Name Preset Play (Dnpp)
CD/External disc control features Disc Name Preset Play (DNPP) Function of remote control with DNPP button If you have preset the name of a disc that you want to listen to in the disc changer, you can look for it by name and start playing it. -
Page 27: Other Features
M.RDM MENU DISC Spectrum analyzer 1 ¢ Spectrum analyzer 2 AUD/MENU Character NOTE This function cannot be operated whilst the Black Mask function is on. indicator Clock display indicator — 27 — Function of the KDC-PS9070R... -
Page 28: Audio Control Setting
Fader Front High-pass filter* 1,2,3 N-F Level* KDC-7070R: None KDC-PS9070R/8070R/8070W: KDC-PS9070R: Not available during the Dual zone system on. NOTE Source tone memory Each source (CD, FM, AM, and disc changer) has its own memory in which to store the bass, treble and N-F level (KDC- PS9070R/8070R/8070W) settings. -
Page 29: Switching Graphic Display
Function of the KDC-PS9070R Switching Graphic Display This function permits the graphic display to be switched to one that is linked with the volume level value or to display various modes. The initial setting is ON (displaying various modes). Turning the Graphic Display On/Off: Hold down the MENU button for one second or more. -
Page 30: Switching Preout
Other features Function of the KDC-PS9070R / KDC-8070R / KDC-8070W Switching preout Switch the preout between the rear and non-fading. When you switch to non-fading, you can adjust the volume separately. The factory default is rear preout. Switching the preout: (KDC-8070R/8070W only) Hold down the MENU button for one second or more. -
Page 31: Selectable Illumination
phone. When the telephone rings: When a call is received, "CALL" is displayed and all the unit functions are temporarily interrupted. Restoring Original Unit Source During Phone Call: Press the SRC button. "CALL" disappears from the display, and the volume of the original source is restored gradually. -
Page 32: Contrast Adjustment
Other features Function of the KDC-8070R/KDC-8070W/KDC-7070R Contrast Adjustment This adjustment permits easy viewing of the display. To adjust the contrast: Hold down the MENU button for one second or more. "MENU" is displayed and the menu mode is turned on. Press the ¢... -
Page 33: Mask Key
Mask Key If you have transmitted the Mask Key's signal once to the unit in advance, you will have to transmit it once again if the unit has been removed from the battery. This function helps prevent theft. When using the unit for the first time: In order to deactivate the demonstration mode, be sure to press the transmit button to transmit the Mask key's signal. -
Page 34: Dual Zone System
Other features Function of the KDC-PS9070R Dual Zone System The following operation allows separate sound sources to control the output of the front and rear speakers. The Dual zone system can only be switched on or off when the source is set to the AUX mode. -
Page 35: Black Mask
Press either the AM or FM button. The display and setting will change. Press the MENU button to end the menu mode. Function of the KDC-PS9070R Dimmer level adjustment You can adjust the Dimmer level of the unit separately when your car's light switch has been turned on or off. -
Page 36: External Amp Control
Other features External Amp Control Adjust the bass boost level of the external amplifier using the main unit. Switching the bass boost level: Hold down the MENU button for one second or more. "MENU" is displayed and the menu mode is turned on. Press the ¢... - Page 37 2WARNING To prevent accidents, do not attempt to use the steering remote control whilst turning the steering wheel. Loading and Replacing the Lithium Battery: Use one lithium battery (CR2025). – Insert the battery with the poles aligned properly, following the illustration. 2WARNING Store unused lithium batteries out of the reach of children.
-
Page 38: Accessories
Make sure only to use the accessories shipped with the unit, as shown above. — 38 — External view ... Number of items ...1 ...1 ...1 ...1 ...1 5~8...KDC-PS9070R / 8070R / 8070W only 9...KDC-PS9070R only... -
Page 39: Installation Procedure
2CAUTION • If your car is not prepared for this special connection-system, consult your KENWOOD dealer. • Only use antenna conversion adapters (ISO-JASO) when the antenna cord has an ISO plug. • Make sure that all cable connections are securely made by inserting jacks until they lock completely. -
Page 40: Connecting Cables To Terminals
To connect to this jack, a converting adapter (optional) is necessary. (KDC-8070R/8070W only) KENWOOD disc changer/DAB control input Fuse (10A) DC/DC converter box (Wrap the cushion – (accessory9) around this Wiring harness box.)(KDC-PS9070R only) (Accessory1) –... -
Page 41: Installation
2WARNING Connecting the ISO Connector (see p.40) The pin arrangement for the ISO connectors depends on the type of vehicle you drive. Make sure to make the proper connections to prevent damage to the unit. The default connection for the wiring harness is described in 1 below. -
Page 42: Removing The Unit
Removing the Unit Removing the hard rubber frame Insert the removal tool into the indentations in the hard rubber frame, and pull it gently until the lock is released. Accessory4 Removal tool Removing the Unit Make the faceplate control panel appear. NOTE When the control panel of the faceplate is hidden, the unit will be locked by the sleeve, making it more difficult to remove... -
Page 43: Attaching Steering Remote Control
Attaching Steering Remote Control (Optional for the KDC-7070R) Mounting Example Attach the operation section and the light emitting section of the Steering Remote Control as shown above. Be sure to attach them to positions that can ensure proper operation. 2CAUTION •... -
Page 44: Troubleshooting Guide
Troubleshooting Guide What might appear to be a malfunction in your unit may just be the result of slight misoperation or miswiring. Before calling service, first check the following table for possible problems. PROBLEM The power does not turn on. The fuse has blown. - Page 45 PROBLEM A CD ejects as soon as it is The CD is upside-down. loaded. The CD is quite dirty. The sound skips on a CD. The CD is scratched or dirty. The specified track does not Random play has been selected. play.
- Page 46 Troubleshooting Guide The following messages are displayed when certain problems are occurring in your system. Take the recommended actions. No disc magazine has been loaded in the changer. The disc magazine is not completely loaded. EJECT ] Load the disc magazine properly. No CD in the unit.
-
Page 47: Specifications
Frequency response (±1 dB) ...10 Hz – 20 kHz Total harmonic distortion (1 kHz) ...0.01 % Signal to Noise ratio (KDC-8070R/8070W/7070R)...93 dB (1 kHz) (KDC-PS9070R) ...105 dB (1 kHz) Dynamic range (KDC-8070R/8070W/7070R) ...93 dB (KDC-PS9070R)...100 dB Channel separation ...85 dB...