Theft Deterrent Panel; Tel Mute - Kenwood KDC-7027 Instruction Manual

Theft Deterrent Panel

The Backpanel of the unit can be detached and
taken with you, helping to deter theft.
Removing the Backpanel
1
Turn the ignition OFF or press the [SRC]
button for at least 1 second.
Turn OFF the power, and the control panel
becomes horizontal.
• After the set time passes in 'OFF Wait Time Setting'
(page34), the panel is closed.
2
Remove the Backpanel forward.
When 'DSI (Disabled System Indicator)' (page33)
is set to ON, DSI blinks.
• The back panel is a precision piece of equipment and
can be damaged by shocks or jolts. For that reason,
keep the back panel in its special storage case while
detached.
• Do not expose the Backpanel or its storage case to
direct sunlight or excessive heat or humidity. Also
avoid places with too much dust or the possibility of
water splashing.
Reattaching the Backpanel
1
Set the Backpanel to the panel bracket.
2
Hold down on the Backpanel until it is locked.

TEL Mute

The audio system automatically mutes when a
call comes in.
When a call comes in
"CALL" is displayed.
The audio system pauses.
Listening to the audio during a call
Press the [SRC] button.
The "CALL" display disappears and the audio
system comes back ON.
When the call ends
Hang up the phone.
The "CALL" display disappears and the audio
system comes back ON.
17
|
English