Auto Memory Entry; Af (Alternative Frequency); Restricting Rds Region (Region Restrict Function); Auto Tp Seek - Kenwood KDC-7027 Instruction Manual

Menu system
In Tuner mode

Auto Memory Entry

For the operation method refer to 'Auto Memory
Entry' (page 19).

AF (Alternative Frequency)

When poor reception is experienced,
automatically switch to another frequency
broadcasting the same program in the same RDS
network with better reception.
Display Setting
"AF ON" The AF function is ON.
"AF OFF" The AF function is OFF.
When the AF function is ON, the "RDS" indicator
is ON.
• When no other stations with stronger reception are
available for the same program in the RDS network,
you may hear the incoming broadcast in bits and
snatches. Turn OFF the AF function in such a case.
Restricting RDS Region (Region
Restrict Function)
You can choose whether or not to restrict the
RDS channels, received with the AF function for a
particular network, to a specific region.
Display Setting
"Regional ON" The Region Restrict Function is ON.
"Regional OFF" The Region Restrict Function is OFF.
• Sometimes stations in the same network broadcast
different programs or use different program service
names.

Auto TP Seek

When the TI function is ON and poor reception
conditions are experienced when listening to
a traffic information station, another traffic
information station with better reception will be
searched for automatically.
36
|
English
Display Setting
"ATPS ON" The Auto TP Seek Function is ON.
"ATPS OFF" The Auto TP Seek Function is OFF.
In FM reception

Monaural Reception

Noise can be reduced when stereo broadcasts are
received as monaural.
Display Setting
"MONO OFF" The monaural reception is OFF.
"MONO ON" The monaural reception is ON.

Text Scroll

Setting the displayed text scroll.
Display Setting
"Scroll MANU" Doesn't scroll.
"Scroll Auto" Scrolls when the display changes.
• The text scrolled is shown below.
- CD text
- Folder name/ File name/ Song title/ Artist name/
Album name
- MD title
- Radio text
- Text for GSM hands free source (message, etc.)

Power OFF Timer

Setting the timer to turn this unit's power OFF
automatically when Standby mode continues.
Using this setting can save the vehicle's battery
power.
Display Setting
"OFF – – –" Power OFF Timer function is OFF.
"OFF 20MIN" Turns the power OFF after 20 minutes.
(Original setting)
"OFF 40MIN" Turns the power OFF after 40 minutes.
"OFF 60MIN" Turns the power OFF after 60 minutes.