Programming The Remote Control - DirecTV ProScan DSS Receiver User Manual

Reference
INPUT In TV and VCR mode, press the INPUT button one or more
times to toggle through the available video inputs.
ANT Lets you switch the source of the video signal from DSS ®
satellite signals to an off-air antenna or cable signal.
TRANSPORT Buttons (REVERSE, PLAY, FORWARD, RECORD, STOP,
PAUSE) Use when controlling an auxiliary device, such as a VCR or
Laserdisc player. Note that the RECORD button is used to schedule a
timer recording when using a program guide.

Programming the Remote Control

The DSS ® remote can be programmed to control most brands of
remote controllable TVs, VCRs, and cable boxes. The remote is
programmed to control most RCA, GE and ProScan TVs and VCRs. The
remote needs to be programmed to control other manufacturers'
brands.
Using the Remote to Control a Second DSS ® Receiver
The remote can control two DSS ® receivers. From the Main menu,
select Options , then System Options , then Remote Setup . Choose
®
which button, DSS1 or DSS2, will control the DSS receiver.
Changing the RF Remote Code
®
The remote can control the DSS receiver using both IR (Infrared)
signals and RF (radio frequency) signals. IR signals require line of sight
to the receiver's front panel remote sensor. RF signals can control the
receiver from other parts of your house–even through walls.
Occasionally, due to interference or other RF devices, you may need to
change the remote and receiver RF code. Change the code in the
System Options menu.
65