DirecTV ProScan DSS Receiver User Manual page 14

First Things First
Connection C
Good Picture and Sound Quality
To use this connection you must have:
• TV with RF input (jack)
• VCR with RF and audio/video inputs
• Coaxial and audio/video cables
To connect TV, VCR, and antenna or cable box:
1. Connect coaxial cables and audio/video cables as shown.
To receive DSS ® programming:
• Tune TV to channel 14 if you receive signals off-air.
• Tune TV to channel 65 if you receive signals from cable.
To receive off-air programming (no cable box):
1. Turn off VCR and DSS
2. Tune TV to desired channel.
To receive cable programming (with cable box):
1. Turn off VCR and DSS
2. Tune TV to cable box output channel (usually CH2, CH3, or CH4).
3. Tune cable box to desired channel.
®
To record DSS programming:
1. Tune TV to the channel on which you receive the DSS
2. Tune DSS ® receiver to desired channel.
3. Set VCR to record on line input.
To view VCR programming:
1. Tune TV to VCR output channel (usually CH3 or CH4).
2. Turn DSS ® receiver off.
12
®
receiver.
®
receiver.
RECEIVER
CABLE
OR
OFF-AIR ANTENNA
® signal.
CAUTION
Do not stack electronic components or
other objects on top of the DSS
receiver. See Safety Information, inside
front cover.
TV
IN
DSS
IN FROM ANT
VIDEO R L
AUDIO
OUT TO TV
SATELLITE IN
R L
VIDEO
AUDIO
VCR
VIDEO IN AUDIO IN
IN FROM ANT
CH3
CH4
R L
OUT TO TV
VIDEO OUT AUDIO OUT
SATELLITE
DISH
®