PRESONUS STUDIOLIVE 24.4.2 Owner's Manual page 90

7 SOFTWARE — Universal Control, Capture and StudioLive Artist
7.3 Capture
90
Capture Audio I/O Setup
There is no need for audio inputs and outputs to be set up in Capture, as
it automotically detects which type of StudioLive mixer (16.4.2 or 24.4.2)
is connected and self-configures. Each input from your StudioLive mixer is
represented with a mono input track in the Track column of the Session, and
each input track has a corresponding level meter in the meter bridge.
The following diagram illustrates the one-to-one relationship of the StudioLive
and Capture input channels. The input signal into each channel on the StudioLive
mixer is automatically routed to each respective input channel in Capture.
.
It is possible to process each StudioLive mixer input channel with the Fat Channel
before the input signal is routed to Capture. To do this, you will need to engage
the Post button in the Dig Out section of the Fat Channel for each channel in your
StudioLive mixer. This routes the signal post-EQ and post-dynamics processing.
The following diagram illustrates the signal flow in this scenario (next page).
PreSonus StudioLive 24.4.2
™