PRESONUS STUDIOLIVE 24.4.2 Owner's Manual page 32

4 Controls
4.1 The Fat Channel
frequencies at and below a user-
selected shelving frequency.
A Low Shelving EQ is like a bass-
control knob on a stereo. In this
mode, the Center Frequency control
selects the shelving frequency.
Low-Mid EQ Activates Controls for the Low-Mid
On/Off EQ for the Selected Input or
Button Output Bus.
This button actives the controls
for the equalizer's Low-Mid band
for the selected input or output.
The button will illuminate to
indicate control is active.
The Low-Mid EQ is available for
all input and output buses.
Low-Mid EQ Sets and Displays the Center
Frequency
Frequency of the Low-Mid EQ.
Control
This encoder sets, and the meter
displays, the center frequency for the
Low-Mid band. You can adjust the
center frequency from 75 Hz to 1.2
kHz.
32 32
PreSonus StudioLive
Low-Mid EQ Sets and Displays the Q of the Low-
Q Control
Mid Frequency Band
This encoder sets, and the meter
displays, the Q for the Low-Mid band.
The Q is the ratio of the center
frequency to the bandwidth. The
bandwidth is inversely proportional
to the Q, so as you raise the Q, you
narrow the bandwidth
Low-Mid EQ Sets and Displays the Gain
Gain Control Attenuation or Boost of the Center
Frequency for the Low-Mid Band.
This encoder sets, and the meter
displays, the Gain cut or boost at
the center frequency of the Low-
Mid band. The level of the center
frequency can be set between -15
and +15 dB.
High-Mid EQ Activates Controls for the High-Mid
On/Off EQ for the Selected Input or Output
Button Bus.
This button actives the control
for the High-Mid band for the
selected input or output. The
button will illuminate to indicate
that the control is active.
The High-Mid EQ is available for
all input and output buses.
24.4.2
™