Subgroups; Subgroup Controls - PRESONUS STUDIOLIVE 24.4.2 Owner's Manual

Owner's Manual

Subgroups

4.5

4.5.1 Subgroup Controls

As explained in Section 8.4, subgroup mixing is very useful for
grouping channels for master level control of a submix (e.g.,
drums) and for providing a fader level for effects.
Subgroup Channel
Select Button
Solo Button
When a Solo button is enabled, that channel or bus will
automatically be selected and its Select button will illuminate.
Mute Button
Channel Fader
Subgroups 4.5
Enables Fat Channel Adjustments of
Subgroup
As previously described in section
4.1.1, the Select button routes its
channel through the Fat Channel,
allowing you to add dynamics
processing, EQ, panning, etc.
Turns Soloing On or Off for the
Subgroup Bus.
This button will solo its channel either to
the main outputs or the monitor outputs
depending on whether PFL or SIP is
selected in the Solo bus section. Please
review Section 8.4 for more details.
Turns Muting On or Off for the
Subgroup Bus.
This button mutes its channel.
It will illuminate red when
the channel is muted.
Controls the Level of the Subgroup Bus.
The fader controls the overall volume
of the signal on its subgroup output.
The white area above the fader can
be used as a scribble strip. Use only
oil pencils. Other types of pens or
pencils cannot be wiped off.
To clean the scribble strip, use a lightly
damp cloth to remove the writing.
Controls 4
43 43