PRESONUS STUDIOLIVE 24.4.2 Owner's Manual page 33

Owner's Manual
High-Mid EQ Sets and Displays the Center
Frequency
Frequency of the High-Mid EQ.
Control
This encoder sets, and the meter
displays, the center frequency of the
High Mid band. You can adjust the Q
from 380 Hz to 5 kHz.
High-Mid EQ Sets and Displays the Q of the High
Q Control
Mid Frequency Band
This encoder sets, and the meter
displays, the Q for the High-Mid
band. The Q is the ratio of the center
frequency to the bandwidth. The
bandwidth is inversely proportional
to the Q, so as you raise the Q, you
narrow the bandwidth.
High-Mid EQ Sets and Displays the Gain
Gain Control Attenuation or Boost at the
Center Frequency.
This encoder sets, and the meter
displays, the gain cut or boost at
the center frequency of the High-
Mid band. The level of the center
frequency can be set between -15
and +15 dB.
High EQ Activates Control for the High EQ
On/Off for the Selected Input or Output Bus.
Button
This button actives control of the
High band for the selected channel
or bus. The button will illuminate
to indicate control is active.
The High EQ band is available
for all input and output buses.
High EQ Sets and Displays the Center
Frequency
Frequency of the High EQ.
Control
This encoder sets, and the meter
displays, the center frequency of the
High band. You can adjust the center
frequency from 1.4 to 18 kHz.
Controls 4
Fat Channel 4.1
33 33