Monitor Bus - PRESONUS STUDIOLIVE 24.4.2 Owner's Manual

4 Controls
4.7 Master Section

4.7.5 Monitor Bus

Solo Bus Monitor Button
Headphone Output
Level Control
Control-Room Monitor
Level Control
Tape-Input Monitor
Button
Main Mix Monitor
Button
48 48
The StudioLive features a headphone output and control-room outputs,
giving you the ability to monitor multiple sources on the StudioLive. The
Monitor bus on the StudioLive allows you to monitor the main outputs, Solo
bus, main FireWire return from your computer, and the stereo analog tape
input. Because the Monitor Bus is a summing amp, you can even monitor the
World Series on your headphones while still running sound at a show.
Assigns the Solo Bus to the Monitor Outputs.
The Solo Bus Monitor button patches any soloed channel, subgroup, or aux send
to the Monitor bus. This can be useful in any number of ways. For example:
• Auditioning an aux-send monitor mix
• Dialing in the dynamics processing and EQ on a subgroup
• Creating a better blend for instrumental sections (horns, strings, etc.).
Adjusts the Overall Level of the Headphone Output.
This knob adjusts the overall level for the headphone output.
Adjusts the Overall Level of the Control Room Monitor Outputs.
This knob adjusts the overall level of the control-room monitor outputs.
Assigns the Tape-Input Signal to the Monitor Bus
The Tape monitor button routes the signal from the tape inputs
(tape returns) to the monitor bus. The level for this input is
controlled by the knob in the 2 Track In section.
Assigns the Main Mix to the Monitor Bus.
The Main Mix Monitor button routes the same signal that is being sent from
the main outputs to the Monitor bus. This signal is always pre-fader.
PreSonus StudioLive 24.4.2
™