Subgroups; Subgroup Controls - PRESONUS StudioLive 24.4.2 Owner's Manual

Owner's Manual
4.5

Subgroups

4.5.1

Subgroup Controls

As explained in Section 8.4, subgroup mixing is very useful for
grouping channels for master level control of a submix (e.g.,
drums) and for providing a fader level for effects.
Subgroup Channel
Select Button
Solo Button
Mute Button
Subgroup Fader
Enables Fat Channel Adjustments of Subgroup.
As previously described in Section 4.1.1, the
Select button routes its channel through the
Fat Channel, allowing you to add dynamics
processing, EQ, panning, etc., or to patch a
Subgroup to the Main Bus.
Turns Soloing On or Off for the Subgroup Bus.
This button will solo it subgroup either to
the monitor outputs post-fader. PFL and SIP
are not available for the Subgroups.
When a Solo button is enabled, that channel
or bus will automatically be selected
and its Select button will illuminate.
Turns Muting On or Off for the Subgroup Bus.
This button mutes its subgroup. It will
illuminate red when the channel is muted.
Controls the Level of the Subgroup Bus.
The fader controls the overall volume of the
signal on its subgroup output.
The white area above the fader can be used
as a scribble strip. Use only oil pencils. Other
types of pens or pencils cannot be wiped off.
To clean the scribble strip, use a lightly
damp cloth to remove the writing.
Controls 4
Subgroup 4.5
41 41 41