PDG-DHT8000L Expand Serial Command Functional Specifications
Error Code Table
7ÿ
Error Code
?
000
101
102
103
201
301
402
-When the received data cannot be decoded
-Parameter designation error (wrong digit number, including
invalid value, etc.)
Normal reception (This is "Not" error)
When the function selected is not available under current
condition.
ex) When receiving signal-related commands while no signal is
entered
Specified value is out of range (Not reflected)
Command mismatched to Hardware (the command is for
Optional function which is not implemented)
Incremented or decremented value or values are beyond upper
or lower limits.
Command cannot be executed during capturing display.
Command cannot be executed during PIN code operation.
20/101
Contents