Cr_Dynamicblack Command; Cr_Hdmisetup Command - Sanyo PDG-DHT8000L - 8000 Lumens Specifications

PDG-DHT8000L Expand Serial Command Functional Specifications

9.10.53 CR_DYNAMICBLACK Command

Command "CR_DYNAMICBLACK" [CR]
Details Get setting status of DynamicBlack
Acceptable
Response
%1
Unacceptable

9.10.54 CR_HDMISETUP Command

Command "CR_HDMISETUP" [CR]
Details Get setting status of HDMI setup
Acceptable
Response
%1
Unacceptable
"000_%1" [CR]
"OFF" ---------------------- Off is selected
"LOW" --------------------- Low is selected
"HIGH" -------------------- High is selected
"Error Code" [CR]
"000_%1" [CR]
"NORMAL" ---------------------- Normal is selected
"ENHANCED" ------------------ Enhanced is selected
"Error Code" [CR]
94/101