PDG-DHT8000L Expand Serial Command Functional Specifications
8.4.5 CF_COLMNSAV Command
Command
"CF_COLMNSAV_%1" [CR]
%1
"000 – 009" ---------------- Specify the area to store
Store current setting status of Color Management to the area specified in %1.
Details
(Available only in the normal Power ON status)
Acceptable
Response
Unacceptable
8.4.6 CF_COLMNLD Command
Command
"CF_COLMNLD_%1" [CR]
%1
"000 – 009" ---------------- Specify the area to store
Retrieve Color Management setting status from the area specified in %1.
Details
(Available only in the normal Power ON status)
Acceptable
Response
Unacceptable
8.4.7 CF_APCTRL Command
Command
"CF_APCTRL_%1" [CR]
"L1" ------------------- Set Auto Picture Control to Level 1.
"L2" ------------------- Set Auto Picture Control to Level 2.
%1
"OFF" ---------------- Set Auto Picture Control OFF.
" UP" ------------------ Switch setting forward direction (OFF→L1→L2→OFF)
" DN" ------------------ Switch setting backward direction (OFF→L2→L1→OFF)
Set Auto Picture Control (Available only in the normal Power ON status)
The value set by this command is not stored in the projector's memory. Therefore,
Details
when the power is turned to ALL OFF status, the value returns to the original
setting. (It is stored in Suspend mode.)
Acceptable
Response
Unacceptable
8.4.8 CF_COLTEMP Command
Command
"CF_COLTEMP_%1" [CR]
%1
"000" – "003"
Set Color Temperature (Available only in the normal Power ON status)
The value set by this command is not stored in the projector's memory. Therefore,
Details
when the power is turned to ALL OFF status, the value returns to the original
setting. (It is stored in Suspend mode.)
Acceptable
Response
Unacceptable
"000" [CR]
"Error Code" [CR]
"000" [CR]
"Error Code" [CR]
"000" [CR]
"Error Code" [CR]
"000" [CR]
"Error Code" [CR]
23/101