Sanyo PDG-DHT8000L - 8000 Lumens Specifications

Sanyo PDG-DHT8000L - 8000 Lumens Specifications

Expand serial command functional specifications
Hide thumbs Also See for PDG-DHT8000L - 8000 Lumens:
Table of Contents

Advertisement

Quick Links

EXPAND SERIAL COMMAND
FUNCTIONAL SPECIFICATIONS
PDG-DHT8000L
Ver.1.00
SANYO Electric Co., Ltd
DS Company
Projector Business Division

Advertisement

Table of Contents
loading

Summary of Contents for Sanyo PDG-DHT8000L - 8000 Lumens

  • Page 1 EXPAND SERIAL COMMAND FUNCTIONAL SPECIFICATIONS PDG-DHT8000L Ver.1.00 SANYO Electric Co., Ltd DS Company Projector Business Division...
  • Page 2: Table Of Contents

    PDG-DHT8000L Expand Serial Command Functional Specifications CONTENTS 1ÿ Overview ........................10 2ÿ Serial Interface Specification..................10 2.1 Transfer Specification ....................10 2.2 Connection .........................10 3ÿ Notes for communication....................11 4ÿ Notation.........................12 5ÿ Functional Execution Command Table..............13 5.1 Image Command Table....................13 5.2 PC Control Command Table ..................13 5.3 Input Control Command Table .................14 5.4 Screen Command Table ....................14 5.5 Lamp Command Table ....................14...
  • Page 3 PDG-DHT8000L Expand Serial Command Functional Specifications 8.4.11 CF_SHARP Command ..................24 8.4.12 CF_GAMMA Command..................25 8.4.13 CF_NZRED Command ..................25 8.4.14 CF_PROGV Command..................25 8.4.15 CF_BCOLOR Command ...................25 8.4.16 CF_IMAGE Command ..................26 8.4.17 CF_IMAGEADJ Command................26 8.5 PC Control Command ....................27 8.5.1 CF_FSYNC Command..................27 8.5.2 CF_TDOTS Command..................27 8.5.3 CF_H-POS Command ..................27 8.5.4 CF_V-POS Command..................28 8.5.5 CF_CLAMP Command ..................28...
  • Page 4 PDG-DHT8000L Expand Serial Command Functional Specifications 8.9 Setting Command ......................38 8.9.1 CF_LANG Command...................38 8.9.2 CF_ MENUPOSITION Command................38 8.9.3 CF_SIMPLEMENU Command................38 8.9.4 CF_MENUSIZE Command ..................39 8.9.5 CF_DISP Command ....................39 8.9.6 CF_BACKGND Command ..................39 8.9.7 CF_PIP Command ....................39 8.9.8 CF_PIPMODE Command ..................40 8.9.9 CF_PIPMAININP Command................40 8.9.10 CF_PIPSUBINPU Command................41 8.9.11 CF_PIPSIZE Command ..................41...
  • Page 5 PDG-DHT8000L Expand Serial Command Functional Specifications 8.9.40 CF_LOGO Command ..................49 8.9.41 CF_FANSPEED Command ................50 8.9.42 CF_RCODE Command..................50 8.9.43 CF_RSENS Command ..................50 8.9.44 CF_P-MANE Command ..................51 8.9.45 CF_P-MANETIME Command................51 8.9.46 CF_ON-STA Command ..................51 8.9.47 CF_PJPINCODE Command................52 8.9.48 CF_FILH Command...................52 8.9.49 CF_FILTIMER Command ..................52 8.9.50 CF_FILCTL Command ..................52 8.9.51 CF_FILSCRL Command..................53 8.9.52 CF_TESTPAT Command...................53...
  • Page 6 PDG-DHT8000L Expand Serial Command Functional Specifications 9.4.4 CR_TINT Command ....................60 9.4.5 CR_APCTRL Command..................60 9.4.6 CR_COLTEMP Command ...................61 9.4.7 CR_WBAL-R Command..................61 9.4.8 CR_WBAL-G Command ..................61 9.4.9 CR_WBAL-B Command..................61 9.4.10 CR_OFFSET-R Command ................61 9.4.11 CR_OFFSET-G Command ................61 9.4.12 CR_OFFSET-B Command ................62 9.4.13 CR_SHARP Command..................62 9.4.14 CR_GAMMA Command ..................62 9.4.15 CR_NZRED Command ..................62 9.4.16 CR_PROGV Command ..................62...
  • Page 7 PDG-DHT8000L Expand Serial Command Functional Specifications 9.7.11 CR_NMSLOT1 Command .................73 9.7.12 CR_NMSLOT2 Command .................73 9.7.13 CR_NMSLOT3 Command .................73 9.7.14 CR_NMSLOT4 Command .................74 9.7.15 CR_IDSLOT1 Command ...................74 9.7.16 CR_IDSLOT2 Command ...................74 9.7.17 CR_IDSLOT3 Command ...................74 9.7.18 CR_IDSLOT4 Command ...................75 9.8 Screen Status Read Commands ................76 9.8.1 CR_SCREEN Command ..................76 9.8.2 CR_KYSTNMODE Command ................76 9.8.3 CR_CEIL Command ....................76...
  • Page 8 PDG-DHT8000L Expand Serial Command Functional Specifications 9.10.11 CR_P-MANE Command ..................83 9.10.12 CR_P-MANETIME Command .................83 9.10.13 CR_ONSTA Command ..................83 9.10.14 CR_SECURITY Command ................83 9.10.15 CR_PJLOCKNOW Command.................84 9.10.16 CR_PJLOCMENU Command................84 9.10.17 CR_FILH Command ..................84 9.10.18 CR_FILCOND Command ................84 9.10.19 CR_FILREPL Command .................84 9.10.20 CR_FILTIMER Command................85 9.10.21 CR_FILREMAIN Command................85 9.10.22 CR_TESTPAT Command ................85...
  • Page 9 PDG-DHT8000L Expand Serial Command Functional Specifications 9.10.51 CR_CMMSTESTPAT Command ..............93 9.10.52 CR_CMTGTESTPAT Command..............93 9.10.53 CR_DYNAMICBLACK Command..............94 9.10.54 CR_HDMISETUP Command ................94 9.11 Other Status Read Commands ................95 9.11.1 CR_STATUS Command..................95 9.11.2 CR_SIGNAL Command ..................95 9.11.3 CR_VMUTE Command..................95 9.11.4 CR_FREEZE Command ..................95 9.11.5 CR_P-TIMER Command..................96 9.11.6 CR_TEMPWARN Command ................96 9.11.7 CR_TEMPFAIL Command.................97...
  • Page 10: Overview

    PDG-DHT8000L Expand Serial Command Functional Specifications Overview 1ÿ 0û This Functional Specification defines communication for PDG-DHT8000L. 0û Most commands are also available to remote-control a projector through RS-232C from a computer. Therefore, commands are defined as Expand Serial Commands. 0û The operation by some commands depends on Optional Board installed in Input Slot of the projector.
  • Page 11: Notes For Communication

    PDG-DHT8000L Expand Serial Command Functional Specifications Notes for communication 3ÿ 0û Expand Serial Command is defined as a single command per line that starts with “C” and ends with carriage return (0x0D). 0û When a projector receives carriage return (0x0D), it starts decoding. 0û...
  • Page 12: Notation

    PDG-DHT8000L Expand Serial Command Functional Specifications Notation 4ÿ 0û Data from a controller to a projector is represented as COMMAND, and data from a projector to a controller in response to the incoming command is represented as RESPONSE. 0û [CR]: Carriage Return Code The command ends with carriage return code.
  • Page 13: Functional Execution Command Table

    PDG-DHT8000L Expand Serial Command Functional Specifications Functional Execution Command Table 5ÿ 5.1 Image Command Table Execute command Item CF_CONT_%1[CR] Set value of Contrast CF_BRIGHT_%1[CR] Set value of Brightness CF_COLOR_%1[CR] Set value of Color CF_TINT_%1[CR] Set value of Tint CF_COLMNSAV_%1[CR] Set area to store current values of Color Management CF_COLMNLD_%1[CR] Set area to load values of Color Management CF_APCTRL_%1[CR]...
  • Page 14: Input Control Command Table

    PDG-DHT8000L Expand Serial Command Functional Specifications 5.3 Input Control Command Table Execute command Item CF_INPUT_%1[CR] Select Input CF_SOURCE_%1[CR] Select Source of selected Input CF_INPUT1_%1[CR] Select Input1 and also set input source to %1 CF_INPUT2_%1[CR] Select Input2 and also set input source to %1 CF_INPUT3_%1[CR] Select Input3 and also set input source to %1 CF_INPUT4_%1[CR]...
  • Page 15 PDG-DHT8000L Expand Serial Command Functional Specifications Delete the values registered in User %1 and return it CF_PIPMODEFREE_%1[CR] to Free status. CF_PIPRST_%1[CR] Reset setting of “Picture in Picture” CF_EDGEBLENDING_%1[CR] Set Edge blending CF_BLEND_%1_%2[CR] Set width of Edge blending CF_BLENDBLK_%1_%2[CR] Set Black level(R/G/B) of Edge blending CF_BLENDBLKALL_%1_%2[CR] Set Black level(ALL) of Edge blending CF_BLENDTESTPAT_%1[CR]...
  • Page 16: Other Command Table

    PDG-DHT8000L Expand Serial Command Functional Specifications CF_CCAPTIONDISP_%1[CR] Set channel of Closed caption CF_CCAPTIONCOLOR_%1[CR] Set color of Closed caption CF_FRAMELOCK_%1[CR] Set Frame lock function Set frame lock frequency CF_FRAMELOCKADJ_%1[CR] CF_FRAMELOCKRST_%1[CR] Reset Frame lock setting 5.7 Other Command Table Execute command Item Control RC/Panel key operation of CF_KEYEMU_%1[CR ] Pointer(Right/Left/Top/Bottom)/SELECT/AUTO PC...
  • Page 17: Video Status Read Command Table

    PDG-DHT8000L Expand Serial Command Functional Specifications CR_SETPCADJ [CR] Get currently displayed signal CR_ORGMODE [CR] Get the original signal of the mode adjusted in PC Adj. CR_PCSTORE [CR] Get Free or Stored status for PC Adj. Mode 1-5 6.3 Video Status Read Command Table Status read command Item Get currently selected signal.
  • Page 18: Setting Status Read Command Table

    PDG-DHT8000L Expand Serial Command Functional Specifications CR_INFLAMP [CR] Get Lamp switching status CR_PROJH [CR] Get the projector total running time CR_HMLAMP [CR] Get the total number of lamps CR_LAMPH [CR] Get information of actual Lamp running time CR_LAMPCORRESPH [CR] Get lamp running time multiplied by a coefficient CR_LAMPINTERVAL [CR] Get Lamp interval status CR_LAMPLIFECONTROL [CR]...
  • Page 19: Other Status Read Command Table

    PDG-DHT8000L Expand Serial Command Functional Specifications CR_PIPSIZE[CR] Get Menu size of “Picture in Picture” Get setting status of Frame lock of “Picture in CR_PIPFRAMELOCK[CR] Picture” CR_PIPSTORE[CR] Get stored status of “Picture in Picture” CR_EDGEBLENDING[CR] Get setting status of Edge blending CR_BLEND[CR] Get setting status of width of Edge blending CR_BLENDBLK[CR]...
  • Page 20: Error Code Table

    PDG-DHT8000L Expand Serial Command Functional Specifications Error Code Table 7ÿ Error Code Contents -When the received data cannot be decoded -Parameter designation error (wrong digit number, including invalid value, etc.) Normal reception (This is “Not” error) When the function selected is not available under current condition.
  • Page 21: Functional Execution Command

    PDG-DHT8000L Expand Serial Command Functional Specifications Functional Execution Command 8ÿ 8.1 Format 1) PC issues a command in the format below: Pattern1: “CF_Command” [CR] Pattern2: “CF_Command_” %1 [CR] CF_: Header Command: String %1: Parameter (String) _: Space (To separate Command and Parameter) 2) The projector decodes the received command and when it gets ready to receive another command, it returns the response.
  • Page 22: Image Command

    PDG-DHT8000L Expand Serial Command Functional Specifications 8.4 Image Command 8.4.1 CF_ CONT Command Command “CF_CONT_%1” [CR] “000-063”--------------- Directly specify setting value of Contrast “UP”--------------------- Increment setting value of Contrast by 1 “DN”--------------------- Decrement setting value of Contrast by 1 Set user controlled value of Contrast. (Available only in the normal Power ON status) Details The value set by this command is not stored in the projector.
  • Page 23: Cf_Colmnsav Command

    PDG-DHT8000L Expand Serial Command Functional Specifications 8.4.5 CF_COLMNSAV Command Command “CF_COLMNSAV_%1” [CR] “000 – 009” ---------------- Specify the area to store Store current setting status of Color Management to the area specified in %1. Details (Available only in the normal Power ON status) Acceptable “000”...
  • Page 24: Cf_Wbal- Command

    PDG-DHT8000L Expand Serial Command Functional Specifications 8.4.9 CF_WBAL- Command Command “CF_WBAL-%1_%2” [CR] “R” ------------- RED “G” ------------ GREEN “B” ------------- BLUE “000-063”------ Directly specify value of Color selected in %1 of White Balance. “UP”------------ Increment setting value of Color specified in %1 of White Balance by 1 “DN”------------ Decrement setting value of Color specified in %1 of White Balance by 1...
  • Page 25: Cf_Gamma Command

    PDG-DHT8000L Expand Serial Command Functional Specifications 8.4.12 CF_GAMMA Command Command “CF_GAMMA_%1” [CR] “000-015” ---------------- Directly specify setting value of Gamma “UP”---------------------- Increment setting value of Gamma by 1 “DN”---------------------- Decrement setting value of Gamma by 1 Set user controlled value of Gamma. (Available only in the normal Power ON status) Details The value set by this command is not stored in the projector’s memory.
  • Page 26: Cf_Image Command

    PDG-DHT8000L Expand Serial Command Functional Specifications 8.4.16 CF_IMAGE Command Command “CF_IMAGE__%1” [CR] “STAND” ----------- Standard (Image adjustment value is set to factory default) “REAL” ------------- Real (Fixed value to display graphic image with natural tone) “CINEMA” --------- Cinema (Fixed value to focus on tone reproduction for movie) “DYNAMIC”------- Dynamic (Fixed value to enable projection with a sharp, powerful picture tone) “CUSTOM1”...
  • Page 27: Pc Control Command

    PDG-DHT8000L Expand Serial Command Functional Specifications 8.5 PC Control Command 8.5.1 CF_FSYNC Command Command “CF_FSYNC_%1” [CR] “0000-0031” ----------------- Directly specify setting value of Fine Sync “UP” --------------------------- Increment setting value of Fine Sync by 1 “DN” --------------------------- Decrement setting value of Fine Sync by 1 Set value of Fine Sync in PC signal (Available only in the normal Power ON status) The value set by this command is not stored in the projector’s memory.
  • Page 28: Cf_V-Pos Command

    PDG-DHT8000L Expand Serial Command Functional Specifications 8.5.4 CF_V-POS Command Command “CF_V-POS_%1” [CR] “0000-nnnn” ------------ Directly specify setting value of Vertical Position “nnnn” indicates maximum value, which is current (Total Line – Display Area V) value “UP” --------------------- Increment setting value of Vertical Position by 1 “DN”...
  • Page 29: Cf_Dline Command

    PDG-DHT8000L Expand Serial Command Functional Specifications 8.5.7 CF_DLINE Command Command “CF_DLINE_%1” [CR] “0100-nnnn” ----------- Directly specify setting value of Display Line “nnnn” indicates maximum value, which is current value of (Total Line - Position V). “UP” ------------------- Increment setting value of Display Line by 1 “DN”...
  • Page 30: Cf_Pcstore Command

    PDG-DHT8000L Expand Serial Command Functional Specifications 8.5.10 CF_PCSTORE Command Command “CF_PCSTORE_%1” [CR] “MODE1” --------------------------- Store current PC Adjust status to Mode1 “MODE2” --------------------------- Store current PC Adjust status to Mode2 “MODE3” --------------------------- Store current PC Adjust status to Mode3 “MODE4” --------------------------- Store current PC Adjust status to Mode4 “MODE5”...
  • Page 31: Input Control Command

    PDG-DHT8000L Expand Serial Command Functional Specifications 8.6 Input Control Command 8.6.1 CF_INPUT Command Command “CF_INPUT_%1” [CR] “1” ---------------------------------- Select Input 1 “2” ---------------------------------- Select Input 2 “3” ---------------------------------- Select Input 3 "4” ---------------------------------- Select Input 4 “UP”-------------------------------- Increment Input No. by 1 “DN”-------------------------------- Decrement Input No.
  • Page 32: Cf_System Command

    PDG-DHT8000L Expand Serial Command Functional Specifications 8.6.4 CF_SYSTEM Command Command “CF_SYSTEM_%1” [CR] “VGA1” --------------------------- Select VGA1 “WXGA3” --------------------- Select WXGA3 “1080I” ------------------------ Select 1080i “1035I” ------------------------ Select 1035i “720p” ------------------------- Select 720p “575p” ------------------------- Select 575p Input is “480p” ------------------------- Select 480p PC Analog “575I”...
  • Page 33: Screen Control Command

    PDG-DHT8000L Expand Serial Command Functional Specifications 8.7 Screen Control Command 8.7.1 CF_SCREEN Command Command “CF_SCREEN_%1” [CR] “NORMAL” ---------------------- Select Normal mode “ZOOM” ------------------------- Select Zoom mode “TRUE” -------------------------- Select True mode “FULL” --------------------------- Select Full mode “CUSTOM” ---------------------- Select Custom mode “DZOOM□UP”...
  • Page 34: Cf_Keystone Command

    PDG-DHT8000L Expand Serial Command Functional Specifications 8.7.3 CF_KEYSTONE Command Command “CF_KEYSTONE _%1” [CR] “UP” ------------- Correct Keystone distortion to reduce upper part of image “FUP” ----------- Correct Keystone distortion to reduce upper part “DN” ------------- Correct Keystone distortion to reduce lower part of image “FDN”...
  • Page 35: Cf_Rear Command

    PDG-DHT8000L Expand Serial Command Functional Specifications 8.7.6 CF_REAR Command Command “CF_REAR_%1” [CR] “ON” --------------------------- Set Rear to ON “OFF” ------------------------- Set Rear to OFF Set/Cancel Rear. (Valid only when in the normal Power ON status.) When Rear is set to ON, image is left/right reversed. Details The status set by this command is stored in EEPROM and the setting remains effective after the power is turned to ALL OFF status.
  • Page 36: Cf_Hscale Command

    PDG-DHT8000L Expand Serial Command Functional Specifications 8.7.9 CF_HSCALE Command Command “CF_HSCALE_%1” [CR] “035” ---------------------- +35 “031” ---------------------- +31 ÿ “002” ---------------------- +2 “001” ---------------------- +1 “000” ---------------------- ±0 “ 01” --------------------- 1 “ 02” --------------------- 2 ÿ “ 31” --------------------- 31 “...
  • Page 37: Lamp Command

    PDG-DHT8000L Expand Serial Command Functional Specifications 8.8 Lamp Command 8.8.1 CF_LAMPMODE Command Command “CF_LAMPMODE_%1” [CR] “FULL” --------------------------- Set lamp mode to 2-lamp (FULL) “LAMP1” ------------------------- Set lamp1 mode “LAMP2” ------------------------- Set lamp2 mode Select Lamp mode. (Valid only when in the normal Power ON status.) Details The value set by this command is stored in EEPROM and the setting remains effective after the power is turned to ALL OFF status.
  • Page 38: Setting Command

    PDG-DHT8000L Expand Serial Command Functional Specifications 8.9 Setting Command 8.9.1 CF_LANG Command Command “CF_LANG_%1” [CR] “ENG” --------------------------- Select ENGLISH “DEU” --------------------------- Select German “FRA” --------------------------- Select French “ITA” ----------------------------- Select Italian “ESP” ---------------------------- Select Spanish “POR” --------------------------- Select Portuguese “NED” --------------------------- Select Dutch “SVE”...
  • Page 39: Cf_Menusize Command

    PDG-DHT8000L Expand Serial Command Functional Specifications 8.9.4 CF_MENUSIZE Command Command “CF_MENUSIZE_%1” [CR] “NORMAL” -------------------- Select Menu size to Normal. “DOUBLE” --------------------- Select Menu size to Double. Select Menu size. (Valid only when in the normal Power ON status.) Details The status set by this command is stored in EEPROM and the setting remains even after the power is turned to ALL OFF status.
  • Page 40: Cf_Pipmode Command

    PDG-DHT8000L Expand Serial Command Functional Specifications 8.9.8 CF_PIPMODE Command Command “CF_PIPMODE_%1” [CR] “PINP” -------------------- Select P in P mode “PBYP” ------------------- Select P by P mode Details Set mode of ”Picture in Picture”. (Available only in the normal Power ON status) Acceptable “000”...
  • Page 41: Cf_Pipsubinpu Command

    PDG-DHT8000L Expand Serial Command Functional Specifications 8.9.10 CF_PIPSUBINPU Command Command “CF_PIPSUBINP_%1_%2” [CR] “1” -------------------- Select Input 1 “2” -------------------- Select Input 2 “3” -------------------- Select Input 3 “4” -------------------- Select Input 4 “DIGITAL” ---------------- Select DVI Input “ANALOG” --------------- Select Analog Input “VIDEO”...
  • Page 42: Cf_Pipposition Command

    PDG-DHT8000L Expand Serial Command Functional Specifications 8.9.12 CF_PIPPOSITION Command Command “CF_PIPPOSITION_%1” [CR] “POS1” -------------------- Move main picture position to up “POS2” -------------------- Move main picture position to down “POS3” -------------------- Move main picture position to left “POS4” -------------------- Move main picture position to right “POS5”...
  • Page 43: Cf_Pipmodefree Command

    PDG-DHT8000L Expand Serial Command Functional Specifications 8.9.15 CF_PIPMODEFREE Command Command “CF_PIPMODEFREE_%1” [CR] “USER1” --------------------------- Set User1 to Free status “USER 2” -------------------------- Set User2 to Free status “USER 3” -------------------------- Set User3 to Free status “USER 4” -------------------------- Set User4 to Free status “USER 5”...
  • Page 44: Cf_Blendblk Command

    PDG-DHT8000L Expand Serial Command Functional Specifications 8.9.19 CF_BLENDBLK Command Command “CF_BLENDBLK_%1_%2” [CR] “R” ---------------------- Red “G” ---------------------- Green “B” ----------------------- Blue “-127” ~ “0127”-------------------- Directly specify value of color of %1 Set value of color specified by Edge blending %1. (Available only in the normal Power ON status) Details The status set by this command is stored in EEPROM and setting remains...
  • Page 45: Cf_Blendmenuoff Command

    PDG-DHT8000L Expand Serial Command Functional Specifications 8.9.23 CF_BLENDMENUOFF Command Command “CF_BLENDMENUOFF_%1” [CR] “SET” ---------------------- Temporarily hide Edge blending menu and edge line “RST” ---------------------- Display Edge blending menu and edge line Set Menu off function of Edge blending. Details (Available only in the normal Power ON status) Acceptable “000”...
  • Page 46: Cf_Cmmsl Command

    PDG-DHT8000L Expand Serial Command Functional Specifications 8.9.27 CF_CMMSL Command Command “CF_CMMSL_%1_%2” [CR] “RED” ---------------------- Set value of Red “GREEN” ----------------- Set value of Green “BLUE” -------------------- Set value of Blue “WHITE” ------------------ Set value of White “HALFWHITE” ---------- Set value of Half white “0000”...
  • Page 47: Cf_Cmautotestpat Command

    PDG-DHT8000L Expand Serial Command Functional Specifications 8.9.30 CF_CMAUTOTESTPAT Command Command “CF_CMAUTOTESTPAT_%1” [CR] “ON” ---------------------- Set to On “OFF” -------------------- Set to Off Set Auto test pattern of Color matching. Details (Available only in the normal Power ON status) Acceptable “000” [CR] Response Unacceptable “Error Code”...
  • Page 48: Cf_Cmtgtestpat Command

    PDG-DHT8000L Expand Serial Command Functional Specifications 8.9.34 CF_CMTGTESTPAT Command Command “CF_CMTGTESTPAT_%1” [CR] “RED” ---------------------- Display Red “GREEN” ------------------ Display Green “BLUE” -------------------- Display Blue “WHITE” ------------------ Display White “CYAN” -------------------- Display Cyan “MAGENTA” ------------- Display Magenta “YELLOW” --------------- Display Yellow “OFF”...
  • Page 49: Cf_Dynamicblack Command

    PDG-DHT8000L Expand Serial Command Functional Specifications 8.9.38 CF_DYNAMICBLACK Command Command “CF_DYNAMICBLACK_%1” [CR] “OFF” --------------------- Set to Off “LOW” -------------------- Set to Low “HIGH” ------------------- Set to High Set status of DynamicBlack.(Available only in the normal Power ON status) Details The status set by this command is stored in EEPROM and the setting remains effective after the power is turned to ALL OFF status.
  • Page 50: Cf_Fanspeed Command

    PDG-DHT8000L Expand Serial Command Functional Specifications 8.9.41 CF_FANSPEED Command Command “CF_FANSPEED_%1” [CR] “MAX” ---------------------------- Select Maximum speed of Fan Control “NOR” ---------------------------- Select Normal speed of Fan Control Switch Fan Control Speed. (Valid only when in the normal Power ON status.) Details The status set by this command is stored in EEPROM and the setting remains effective after the power is turned to ALL OFF status.
  • Page 51: Cf_P-Mane Command

    PDG-DHT8000L Expand Serial Command Functional Specifications 8.9.44 CF_P-MANE Command Command “CF_P-MANE_%1” [CR] “OFF” ---------------------------------- Set Power Management to Off “READY” ----------------------------- Set Power Management to Ready “SHUTDOWN” --------------------- Set Power Management to Shut Down mode “UP” ----------------------- Switch forward (Off→Ready→Shut down→Off) “DN”...
  • Page 52: Cf_Pjpincode Command

    PDG-DHT8000L Expand Serial Command Functional Specifications 8.9.47 CF_PJPINCODE Command Command “CF_PJPINCODE_%1” [CR] “0000 – 9999” ------------- Directly specify PJ PIN code Enter PIN code to cancel PIN code lock (Available only in the normal Power ON status) PIN code can not be changed. (Only PIN code lock is canceled.) *When PIN code Lock is enabled: PIN code is matched ------------------------- Command is valid (Acceptable) PIN code is mismatched -------------------- Command is invalid (Error code “102”)
  • Page 53: Cf_Filscrl Command

    PDG-DHT8000L Expand Serial Command Functional Specifications 8.9.51 CF_FILSCRL Command Command “CF_FILSCRL_%1” [CR] “RST” ---------------------- Reset Filter scroll counter Details Reset Filter scroll counter Acceptable Acceptable Response Unacceptable Unacceptable 8.9.52 CF_TESTPAT Command Command “CF_TESTPAT_%1” [CR] “COLOR” ---------------------- Display Color bar “GRAD1” ---------------------- Display 16step(white→black) “GRAD2”...
  • Page 54: Cf_Shutrcprot Command

    PDG-DHT8000L Expand Serial Command Functional Specifications 8.9.55 CF_SHUTRCPROT Command Command “CF_SHUTRCPROT_%1” [CR] “ON” ------------------ Disable RC key from controlling Shutter (Protection On) “OFF” ----------------- Enable RC key to control Shutter (Protection Off) Set valid / invalid of RC use on Shutter control function Details (Valid only when in the normal Power ON status) Acceptable...
  • Page 55: Cf_Shutrelease Command

    PDG-DHT8000L Expand Serial Command Functional Specifications 8.9.59 CF_SHUTRELEASE Command Command “CF_SHUTRELEASE_%1” [CR] “ANY”----------Enable to release Shutter with any key “SHUTTER” ------------------ Enable to release Shutter with only “SHUTTER” key Set Release key of Shutter. (Valid only when in the normal Power ON status) Details The status set by this command is stored in EEPROM and setting remains effective even after the power is turned to ALL OFF status.
  • Page 56: Cf_Ccaptioncolor Command

    PDG-DHT8000L Expand Serial Command Functional Specifications 8.9.62 CF_CCAPTIONCOLOR Command Command “CF_CCAPTIONCOLOR _%1” [CR] “COLOR” ------- Select Color “WHITE” -------- Select White Select color of Closed caption. The status set with this command is stored in EEPROM and its setting is effective even after ALL is OFF.
  • Page 57: Other Command

    PDG-DHT8000L Expand Serial Command Functional Specifications 8.10 Other Command 8.10.1 CF_KEYEMU Command Command “CF_KEYEMU_%1” [CR] “RIGHT” ---------------- Move Pointer rightward in On-Screen Display Menu “LEFT” ------------------ Move Pointer leftward in On-Screen Display Menu “UP” ---------------------- Move Pointer to upward On-Screen Display Menu “DN”...
  • Page 58: Cf_Power Command

    PDG-DHT8000L Expand Serial Command Functional Specifications 8.10.3 CF_POWER Command Command “CF_POWER_%1” [CR] “ON” ----------------------------- Power ON “OFF” --------------------------- Power OFF * Issuing another command during countdown process forced countdown operation to be terminated. * Error Code is returned in some projector statuses, which indicates the command is impossible to be executed.
  • Page 59: Status Read Command

    PDG-DHT8000L Expand Serial Command Functional Specifications Status Read Command 9ÿ 9.1 Format PC issues a command in the format below: “CR_Command” [CR] Command: String When the projector receives the applicable command, it returns the required information as a data string. “000_”...
  • Page 60: Image Status Read Commands

    PDG-DHT8000L Expand Serial Command Functional Specifications 9.4 Image Status Read Commands 9.4.1 CR_CONT Command Command “CR_CONT” [CR] Details Get user controlled value of Contrast Acceptable “000_%1” [CR] Response “000” – “063” Unacceptable “?” [CR] 9.4.2 CR_BRIGHT Command Command “CR_BRIGHT” [CR] Details Get user controlled value of Brightness Acceptable...
  • Page 61: Cr_Coltemp Command

    PDG-DHT8000L Expand Serial Command Functional Specifications 9.4.6 CR_COLTEMP Command Command “CR_COLTEMP” [CR] Details Get Color Temperature setting status Acceptable “000_%1” [CR] “000” ~“003” Response “BLANK” ---- OSD Menu is blank (Neither of Xlow / Low / Mid / High) Unacceptable “?”...
  • Page 62: Cr_Offset-B Command

    PDG-DHT8000L Expand Serial Command Functional Specifications 9.4.12 CR_OFFSET-B Command Command “CR_OFFSET-B” [CR] Details Get user controlled Blue value of Offset Acceptable “000_%1” [CR] Response “000” – “063” Unacceptable “?” [CR] 9.4.13 CR_SHARP Command Command “CR_SHARP” [CR] Details Get user controlled value of Sharpness Acceptable “000_%1”...
  • Page 63: Cr_Bcolor Command

    PDG-DHT8000L Expand Serial Command Functional Specifications 9.4.17 CR_BCOLOR Command Command “CR_PROGV” [CR] Details Get BrilliantColor setting status Acceptable “000_%1” [CR] “ON” ------------------------------ Set BrilliantColor to On “OFF” ----------------------------- Set BrilliantColor to Off Response “Error Code” [CR] -----------When command is invalid in the given Unacceptable condition (such as being selected input) “?”...
  • Page 64: Pc Status Read Commands

    PDG-DHT8000L Expand Serial Command Functional Specifications 9.5 PC Status Read Commands 9.5.1 CR_FSYNC Command Command “CR_FSYNC” [CR] Details Get value of Fine Sync Acceptable “000_%1” [CR] Response “0000” – “0031” “Error Code” [CR] -------------- When command is invalid in the Unacceptable given condition (such as being selected input) “?”...
  • Page 65: Cr_Clamp Command

    PDG-DHT8000L Expand Serial Command Functional Specifications 9.5.5 CR_CLAMP Command Command “CR_CLAMP” [CR] Details Get value of Clamp Acceptable “000_%1” [CR] “0000” – “ 4095” Response “Error Code” [CR] -------------- When command is invalid in the Unacceptable given condition (such as being selected input) “?”...
  • Page 66: Cr_Setpcadj Command

    PDG-DHT8000L Expand Serial Command Functional Specifications 9.5.8 CR_SETPCADJ Command Command “CR_SETPCADJ” [CR] Details Get PC signal for current system Acceptable “000_%1” [CR] When input signal is PC Analog; “VGA1” ------------------------ Indicates VGA1 is selected “XGA1” ------------------------ Indicates XGA1 is selected “WXGA3”...
  • Page 67: Cr_Orgmode Command

    PDG-DHT8000L Expand Serial Command Functional Specifications 9.5.9 CR_ORGMODE Command Command “CR_ORGMODE” [CR] Get the original signal of current selected Mode that is set in PC Adj. Details When MODE1- 10 or EXT11-60 is not selected, get the current signal. Acceptable “000_%1”...
  • Page 68: Video Status Read Command

    PDG-DHT8000L Expand Serial Command Functional Specifications 9.6 Video Status Read Command 9.6.1 CR_SERSYS Command Command “CR_SERSYS” [CR] Get currently selected signal. Details Value only when Input is video. (Invalid when Input is computer) Acceptable “000_%1” [CR] “1080PSF/24” ------- 1080psf 24Hz “1080P60”...
  • Page 69: Input Read Command

    PDG-DHT8000L Expand Serial Command Functional Specifications 9.7 Input Read Command 9.7.1 CR_INPUT Command Command “CR_INPUT” [CR] Details Get selected INPUT No. Acceptable “000_%1” [CR] Response “1” – “4” Unacceptable “?” [CR] 9.7.2 CR_SOURCE Command Command “CR_SOURCE” [CR] Details Get selected Source Acceptable “000_%1”...
  • Page 70: Cr_System Command

    PDG-DHT8000L Expand Serial Command Functional Specifications 9.7.3 CR_SYSTEM Command Command “CR_SYSTEM” [CR] Details Get selected System Response Acceptable “000_%1” [CR] “VGA1” ------------------------- indicates VGA1 is selected “VGA2” ------------------------- indicates VGA2 is selected “WXGA3” ---------------------- indicates WXGA3 is selected “1080I” ------------------------- indicates 1080i is selected “1035I”...
  • Page 71: Cr_ Syslist Command

    PDG-DHT8000L Expand Serial Command Functional Specifications “AUTO” ------------------- indicates Auto is selected “NTSC” ------------------- indicates NTSC is selected “NTSC443” -------------- indicates NTSC4.43 is selected “PAL” ---------------------- indicates PAL is selected Input is Video “SECAM” ----------------- indicates SECAM is selected or S-video “PAL-M”...
  • Page 72: Cr_Modelist Command

    PDG-DHT8000L Expand Serial Command Functional Specifications 9.7.5 CR_MODELIST Command Command “CR_MODELIST” [CR] Details Get possible modes for Mode list Acceptable “000_%1_%2_---_%x” [CR] Error Code “101” is returned except for PC-Analog and for no signal with PC-Analog Possible modes in Mode1-10 are returned when PC-Analog signal is coming.
  • Page 73: Cr_Srcinp4 Command

    PDG-DHT8000L Expand Serial Command Functional Specifications 9.7.9 CR_SRCINP4 Command Command “CR_SRCINP3” [CR] Details Get Source of Input 4 Acceptable “000_%1” [CR] Response The same data as CF_SRCINP1 Unacceptable “?” [CR] 9.7.10 CR_HMSLOT Command Command “CR_HMSLOT” [CR] Details Get the total number of Slots(Inputs) Acceptable “000_%1”...
  • Page 74: Cr_Nmslot4 Command

    PDG-DHT8000L Expand Serial Command Functional Specifications 9.7.14 CR_NMSLOT4 Command Command “CR_NMSLOT4” [CR] Details Get the board name inserted to Slot 4 Acceptable “000_%1” [CR] Response The same data as CR_NMSLOT1 Unacceptable “?” [CR] 9.7.15 CR_IDSLOT1 Command Command “CR_IDSLOT1” [CR] Get ID information on Slot 1.This command is used to recognize the inserted Details board and specify the valid Input source.
  • Page 75: Cr_Idslot4 Command

    PDG-DHT8000L Expand Serial Command Functional Specifications 9.7.18 CR_IDSLOT4 Command Command “CR_IDSLOT4” [CR] Get ID information on Slot 4. Details This command is to recognize the inserted slot board and specify the valid Input source. Acceptable “000_%1” [CR] Response The same as CR_IDSLOT1 Unacceptable “?”...
  • Page 76: Screen Status Read Commands

    PDG-DHT8000L Expand Serial Command Functional Specifications 9.8 Screen Status Read Commands 9.8.1 CR_SCREEN Command Command “CR_SCREEN” [CR] Details Get currently selected screen image size Acceptable “000_%1” [CR] “NORMAL” ---------------------- Normal mode “ZOOM” -------------------------- Zoom mode “NATURAL” -------------------- Natural wide mode “FULL”...
  • Page 77: Cr_Vpos Command

    PDG-DHT8000L Expand Serial Command Functional Specifications 9.8.6 CR_VPOS Command Command “CR_VPOS” [CR] Details Get setting status of V Position Acceptable “000_%1” [CR] Response “-15”ÿ ”015” Unacceptable “Error Code” [CR] 9.8.7 CR_HSCALE Command Command “CR_HSCALE” [CR] Details Get setting status of H scale Acceptable “000_%1”...
  • Page 78: Lamp Status Read Commands

    PDG-DHT8000L Expand Serial Command Functional Specifications 9.9 Lamp Status Read Commands 9.9.1 CR_LAMPREPL Command Command “CR_LAMPREPL” [CR] Details Get the information of Lamp Replacement time Acceptable “000_%1” [CR] “2**” 2 ---------------- indicates 2 lamps are used in this model. * ---------------- indicates the status of each lamp in lamp number order.
  • Page 79: Cr_Inflamp Command

    PDG-DHT8000L Expand Serial Command Functional Specifications 9.9.5 CR_INFLAMP Command Command “CR_INFLAMP” [CR] Details Get Lamp mode switching status Acceptable “000_%1” [CR] “NML” --------- in Normal status (lamp switching operation is not Response active.) Unacceptable “?” [CR] 9.9.6 CR_PROJH Command Command “CR_PROJH”...
  • Page 80: Cr_Lampcorresph Command

    PDG-DHT8000L Expand Serial Command Functional Specifications 9.9.9 CR_LAMPCORRESPH Command Command “CR_LAMPCORRESPH” [CR] Get Lamp running time (in hours) Details *return lamp running time multiplied by a coefficient (not actual running time) Acceptable “000_%1” [CR] Response “00000”-“99999” Unacceptable “Error Code” [CR] 9.9.10 CR_LAMPINTERVAL Command Command “CR_LAMPINTERVAL”...
  • Page 81: Setting Status Read Commands

    PDG-DHT8000L Expand Serial Command Functional Specifications 9.10 Setting Status Read Commands 9.10.1 CR_LANG Command Command “CR_LANG” [CR] Details Get selected language Acceptable “000_%1” [CR] “ENG” -------------------------- English is selected “DEU” -------------------------- German is selected “FRA” -------------------------- French is selected “ITA” ---------------------------- Italian is selected “ESP”...
  • Page 82: Cr_Backgnd Command

    PDG-DHT8000L Expand Serial Command Functional Specifications 9.10.5 CR_BACKGND Command Command “CR_BACKGND” [CR] Details Get setting status of Screen for no signal Acceptable “000_%1” [CR] “BLUE” -------------------------------- Blue Back is selected Response “USER” ------------------------------- User is selected “BLACK” ------------------------------ Black Back is selected Unacceptable “Error Code”...
  • Page 83: Cr_Rsens Command

    PDG-DHT8000L Expand Serial Command Functional Specifications 9.10.10 CR_RSENS Command Command “CR_RSENS” [CR] Details Get selected location of infrared remote receiver of remote control Acceptable “000_%1” [CR] “ALL” ------------------ Front and back and top parts are valid “FRONTTOP” ------- Both front and top parts are valid “BACKTOP”...
  • Page 84: Cr_Pjlocknow Command

    PDG-DHT8000L Expand Serial Command Functional Specifications 9.10.15 CR_PJLOCKNOW Command Command “CR_PJLOCKNOW” [CR] Details Get actual setting status of PIN code lock Acceptable “000_%1” [CR] “LOCK” ------ PJ is locked PIN code lock is set to ON1/ON2 on the menu and PJ PIN code is not entered, therefore PJ is actually locked.
  • Page 85: Cr_Filtimer Command

    PDG-DHT8000L Expand Serial Command Functional Specifications 9.10.20 CR_FILTIMER Command Command “CR_FILTIMER” [CR] Details Get time to display Filter cleaning / replacement warning on screen Acceptable “000_%1” [CR] “1000” ---------------------- Display massage by 1000h used. “2000” ---------------------- Display massage by 2000h used. Response “3000”...
  • Page 86: Cr_Shutrcprot Command

    PDG-DHT8000L Expand Serial Command Functional Specifications 9.10.24 CR_SHUTRCPROT Command Command “CR_SHUTRCPROT” [CR] Details Get status if Shutter can be controlled by R/C Acceptable “000_%1” [CR] “ON” -------------------- Shutter is not controllable by R/C Response “OFF” ------------------- Shutter is controllable by R/C Unacceptable “Error Code”...
  • Page 87: Cr_Delayctrl Command

    PDG-DHT8000L Expand Serial Command Functional Specifications 9.10.29 CR_DELAYCTRL Command Command “CR_DELAYCTRL” [CR] Details Get setting status of Video delay control Acceptable “000_%1” [CR] “OFF”---------- Set Video delay control to OFF “LOW”---------- Set Video delay control to LOW Response “MID”------------ Set Video delay control to MID “HIGH”---------- Set Video delay control to HIGH Unacceptable “Error Code”...
  • Page 88: Cr_Framelockadj Command

    PDG-DHT8000L Expand Serial Command Functional Specifications 9.10.33 CR_FRAMELOCKADJ Command Command “CR_FRAMELOCKADJ” [CR] Details Get manually set value of Frame lock. Acceptable “000_%1” [CR] Response “23.500” - “62.000” Unacceptable “Error Code” [CR] 9.10.34 CR_PIP Command Command “CR_PIP” [CR] Details Get setting status of “Picture in Picture” Acceptable “000_%1”...
  • Page 89: Cr_Pipmaininp Command

    PDG-DHT8000L Expand Serial Command Functional Specifications 9.10.36 CR_PIPMAININP Command Command “CR_PIPMAININP” [CR] Details Get Input and Source of “Picture in Picture”. (Main picture) Acceptable “000_%1_%2” [CR] “1” -------------------- Input1 is selected “2” -------------------- Input2 is selected “3” -------------------- Input3 is selected “4”...
  • Page 90: Cr_Pipsize Command

    PDG-DHT8000L Expand Serial Command Functional Specifications 9.10.38 CR_PIPSIZE Command Command “CR_PIPSIZE” [CR] Details Get picture size of “Picture in Picture”. (Sub picture) Acceptable “000_%1_%2” [CR] “1” -------------------- 10% is selected(Main size) “2” -------------------- 20% is selected(Main size) “3” -------------------- 30% is selected(Main size) “4”...
  • Page 91: Cr_Edgeblending Command

    PDG-DHT8000L Expand Serial Command Functional Specifications 9.10.42 CR_EDGEBLENDING Command Command “CR_BLEND” [CR] Details Get all values of width of Edge blending Acceptable “000_%1_%2_%3_%4” [CR] Left width data comes first, and then one space, after that right width data is followed. %1 = Left width %2 = Right width %3 = Top width...
  • Page 92: Cr_Cmmsxy_%1 Command

    PDG-DHT8000L Expand Serial Command Functional Specifications 9.10.46 CR_CMMSXY_%1 Command Command “CR_CMMSXY_%1” [CR] Details Get “x”,”y” value of Measured of Color matching Acceptable “000_%2_%3” [CR] “RED” ---------------------- value of Red is selected “GREEN” ----------------- value of Green is selected “BLUE” -------------------- value of Blue is selected “WHITE”...
  • Page 93: Cr_Cmtgg_%1 Command

    PDG-DHT8000L Expand Serial Command Functional Specifications 9.10.49 CR_CMTGG_%1 Command Command “CR_CMMTGG_%1” [CR] Details Get “g” value of Target of Color matching Acceptable “000_%2” [CR] “RED” ---------------------- value of Red is selected “GREEN” ----------------- value of Green is selected “BLUE” -------------------- value of Blue is selected “WHITE”...
  • Page 94: Cr_Dynamicblack Command

    PDG-DHT8000L Expand Serial Command Functional Specifications 9.10.53 CR_DYNAMICBLACK Command Command “CR_DYNAMICBLACK” [CR] Details Get setting status of DynamicBlack Acceptable “000_%1” [CR] “OFF” ---------------------- Off is selected Response “LOW” --------------------- Low is selected “HIGH” -------------------- High is selected Unacceptable “Error Code” [CR] 9.10.54 CR_HDMISETUP Command Command “CR_HDMISETUP”...
  • Page 95: Other Status Read Commands

    PDG-DHT8000L Expand Serial Command Functional Specifications 9.11 Other Status Read Commands 9.11.1 CR_STATUS Command Command “CR_STATUS” [CR] Get operating status of Projector Details Same as “CR0” in basic command except error code follows it. Acceptable “000_%1” [CR] “00” = Power ON “80”...
  • Page 96: Cr_P-Timer Command

    PDG-DHT8000L Expand Serial Command Functional Specifications 9.11.5 CR_P-TIMER Command Command “CR_P-TIMER” [CR] Details Get Presentation Timer operating status Acceptable “000_%1” [CR] “ON” ---------------------------- Presentation Timer is ongoing. Response ”STOP” ------------------------ Presentation Timer is paused. “OFF” -------------------------- Presentation Timer is not active. Unacceptable “?”...
  • Page 97: Cr_Tempfail Command

    PDG-DHT8000L Expand Serial Command Functional Specifications 9.11.7 CR_TEMPFAIL Command Command “CR_TEMPFAIL” [CR] Get the temperature inside the projector when the abnormal status occurs. Details It is possible to get the temperatures for more than one sensor all at once if it is applicable.
  • Page 98: Cr_Temp Command

    PDG-DHT8000L Expand Serial Command Functional Specifications 9.11.8 CR_TEMP Command Command “CR_TEMP”[CR] Get the current temperature information inside a projector. Details It is possible to get the temperatures all at once when several sensors installed. Acceptable “000_%1_%2_%3_%4” [CR] %1 ------------------ Sensor 1 temp. (External temp.) %2 ------------------ Sensor 2 temp.
  • Page 99: Cr_Optctrlno Command

    PDG-DHT8000L Expand Serial Command Functional Specifications 9.11.11 CR_OPTCTRLNO Command Command “CR_OPTCTRLNO”[CR] Details Get value of Option control No. Acceptable “000_%1” [CR] Response Four digits of alphanumeric characters Unacceptable “?” [CR] 9.11.12 CR_LENSTYPE Command Command “CR_LENSTYPE”[CR] Details Get which type of Lens is currently installed Acceptable “000_%1”...
  • Page 100: Command With Address Specification

    PDG-DHT8000L Expand Serial Command Functional Specifications 10ÿ Command with Address Specification 10.1. Overview - Commands with address are used to remote control more than one projector through RS-232C by a computer. - The command with address is defined as a single command per line that starts with “A” and ends with carriage return (0x0D).
  • Page 101: When The Command Pipelining Is Needed

    PDG-DHT8000L Expand Serial Command Functional Specifications 10.2.2. When the command pipelining is needed When it needs command pipelining, the operation is the same as the remote control as below: Sending-side system issues commands every 100ms When receiving an applicable command, the function is executed repeatedly for 120ms.

Table of Contents