Adding A Rapid7 Nexpose Scanner - Juniper SECURITY THREAT RESPONSE MANAGER 2008.2 - MANAGING VULNERABILITY ASSESSMENT V1 Manual

9
Adding a Rapid7
NeXpose Scanner
Step 1
Step 2
Step 3
Step 4
M
ANAGING
S
CANNERS
This chapter includes information on configuring a Rapid7 NeXpose scanner
including:

Adding a Rapid7 NeXpose Scanner

•
Editing a Rapid7 NeXpose Scanner
•
• Deleting a Rapid7 NeXpose Scanner
STRM supports Rapid7 NeXpose version 4.5 and above. For more information,
see your Rapid7 NeXpose documentation.
To add a Rapid7 NeXpose scanner:
In the Administration Console, click the SIM Configuration tab.
The SIM Configuration panel appears.
Click the VA Scanners icon.
The VA Scanners window appears.
Click Add.
The Add Scanner window appears.
Enter values for the following parameters:
Table 9-1 Scanner Parameters
Parameter Description
Scanner Name Specify the name you wish to assign to this scanner. The name
may be up to 255 characters in length.
Description Specify a description for this scanner. The description may be up
to 255 characters in length.
Managed Host Using the drop-down list box, select the managed host you wish
to configure this scanner.
Type Using the drop-down list box, select Rapid7 Nexpose Scanner.
The list of parameters for the selected scanner type appears.
Managing Vulnerability Assessment
R 7 N
APID
X
E POSE