Juniper SECURITY THREAT RESPONSE MANAGER 2008.2 - MANAGING VULNERABILITY ASSESSMENT V1 Manual page 16

14 M N
ANAGING ESSUS
Step 5
S
CANNERS
Table 3-1 Scanner Parameters (continued)
Parameter
Description
Managed Host
Type
The list of parameters for the selected scanner type appears.
Enter values for the parameters:
Table 3-2 Nessus Parameters
Parameter
Path
Server Host Name Specify the IP address or DNS name of the Nessus server as
Server Port
Username
Password
Managing Vulnerability Assessment
Description
Specify a description for this scanner. The description may be up
to 255 characters in length.
Using the drop-down list box, select the managed host you wish
to configure this scanner.
Using the drop-down list box, select Nessus Scanner.
Description
Specify the location of the Nessus client executable file on the
Nessus client host. The default is /usr/bin/nessus.
seen by the Nessus client. The default is localhost.
Specify the port for the nessus server. The default is port 1241.
Specify the Nessus username that the Nessus client uses to
authenticate with the Nessus server.
Specify the Nessus password.