Managing Qualys Scanners; Adding A Qualys Scanner; Editing A Qualys Scanner; Deleting A Qualys Scanner - Juniper SECURITY THREAT RESPONSE MANAGER 2008.2 - MANAGING VULNERABILITY ASSESSMENT V1 Manual

6
Adding a Qualys
Scanner
Step 1
Step 2
Step 3
Step 4
M
ANAGING
A QualysGuard vulnerability scanner runs on a remote web server. STRM must
access this server through an HTTPS connection to run and retrieve scan results.
STRM supports Qualys version 4.7 to 6.0.44-1. For more information, see your
Qualys documentation.
This chapter includes information on configuring a Qualys scanner including:
•

Adding a Qualys Scanner

Editing a Qualys Scanner

•

Deleting a Qualys Scanner

•
To add a Qualys scanner:
In the Administration Console, click the SIM Configuration tab.
The SIM Configuration panel appears.
Click the VA Scanners icon.
The VA Scanners window appears.
Click Add.
The Add Scanner window appears.
Enter values for the following parameters:
Table 6-1 Scanner Parameters
Parameter Description
Scanner Name Specify the name you wish to assign to this scanner. The name
may be up to 255 characters in length.
Description Specify a description for this scanner. The description may be up
to 255 characters in length.
Managed Host Using the drop-down list box, select the managed host you wish
to configure this scanner.
Type Using the drop-down list box, select Qualys Scanner.
The list of parameters for the selected scanner type appears.
Managing Vulnerability Assessment
Q S
UALYS CANNERS