Configuring Devices; Adding A Device - Juniper SECURITY THREAT RESPONSE MANAGER 2008.2 - ADAPTIVE LOG EXPORTER REV1 Manual

Step 7
Step 8
Step 9
Step 10
Configuring
Devices

Adding a Device

Step 1
Click Next.
The Installation Window appears.
If you wish to change the location to which the devices will be installed:
Click Change Location.
a
Click Add Location.
b
Using the menu tree, select the location you wish to install the devices.
c
Click OK.
d
Click OK.
e
Click Finish.
The Feature Verification window appears.
Click Install All to install all chosen devices.
Once you have installed the device types, such as Cisco ACS, to your Devices tab,
you can add multiple devices to integrate with STRM. Each device you add to the
device type must be configured and then mapped to a destination. For more
information on configuring the destination, see
Using the Adaptive Log Exporter, you can,
Adding a Device
•
Editing a Device
•
• Deleting a Device
To add a device:
From the Start menu, select Start > Programs > AdaptiveLogExporter >
Configure Adapter Log Exporter.
The Adaptive Log Exporter appears.
STRM Adaptive Log Exporter

Configuring Devices

Chapter 5 Managing
29
Destinations.