Editing A Profiler Scanner; Deleting A Profiler Scanner - Juniper SECURITY THREAT RESPONSE MANAGER 2008.2 - MANAGING VULNERABILITY ASSESSMENT V1 Manual

Step 6
Step 7
Step 8
Editing a Profiler
Scanner
Step 1
Step 2
Step 3
Step 4
Step 5
Step 6
Step 7
Deleting a Profiler
Scanner
Step 1
Step 2
Step 3
Step 4
Table 8-2 Juniper NSM Profiler Parameters (continued)
Parameter Description
Database Name Specify the name of the Profiler database. The default is
profilerDB.
To configure the CIDR ranges you wish this scanner to consider:
In the text field, enter the CIDR range you wish this scanner to consider or click
a
Browse to select the CIDR range from the network list.
Click Add.
b
Click Save.
From the STRM Administration Console menu, select Configurations > Deploy
Configuration Changes.
To edit an Juniper NSM Profiler scanner:
In the Administration Console, click the SIM Configuration tab.
The SIM Configuration panel appears.
Click the VA Scanners icon.
The VA Scanners window appears.
Select the scanner you wish to edit.
Click Edit.
The Edit Scanner window appears.
Update parameters, as necessary. See
Click Save.
From the STRM Administration Console menu, select Configurations > Deploy
Configuration Changes.
To delete an Juniper NSM Profiler scanner:
In the Administration Console, click the SIM Configuration tab.
The SIM Configuration panel appears.
Click the VA Scanners icon.
The VA Scanners window appears.
Select the scanner you wish to delete.
Click Delete.
A confirmation window appears.
Managing Vulnerability Assessment

Editing a Profiler Scanner

Table 8-2.
41