Configuring Content Filtering (Nsm Procedure); Configuring A Protocol Command Custom Object - Juniper NETWORK AND SECURITY MANAGER 2010.4 - CONFIGURING J SERIES SERVICES ROUTERS AND SRX SERIES SERVICES GATEWAYS GUIDE REV Manual

Configuring J Series Services Routers and SRX Series Services Gateways Guide
Related
Documentation

Configuring Content Filtering (NSM Procedure)

Configuring a Protocol Command Custom Object

350
Select Antivirus and enter the name of the antivirus profile.
6.
In the Http, Imap, Pop3, or Smtp profile boxes, enter the name of the profile you created
7.
earlier.
For Ftp, select the upload and download profiles.
8.
Click OK to save the changes.
9.
Once you have configured a UTM policy for express antivirus, attach the UTM policy to
a security policy that you create.
Configuring Local List Antispam (NSM Procedure) on page 342
Configuring Content Filtering (NSM Procedure) on page 350
Configuring Web Filtering (NSM Procedure) on page 353
This section includes the following topics:
Configuring a Protocol Command Custom Object on page 350
Configuring a Filename Extension List Custom Object on page 351
Configuring a MIME Pattern List Custom Object on page 351
Configuring a Content–Filtering Feature Profile on page 351
Configuring a UTM Policy for Content-Filtering on page 353
To configure a protocol command custom object:
In the NSM navigation tree, select Device Manager > Devices.
1.
Click the Device Tree tab, and then double-click the device for which you want to
2.
configure a protocol command custom object.
Click the Configuration tab. In the configuration tree, select Security > Utm > Custom
3.
Objects.
Select Protocol Command and click New.
4.
Enter a unique name for the protocol command custom object.
5.
Select Value and add a new entry.
6.
Enter the commands for the protocol in Value.
7.
Click OK to save the changes.
8.
Copyright © 2010, Juniper Networks, Inc.