Juniper NETWORK AND SECURITY MANAGER 2010.4 - CONFIGURING J SERIES SERVICES ROUTERS AND SRX SERIES SERVICES GATEWAYS GUIDE REV Manual page 65

Copyright © 2010, Juniper Networks, Inc.
Chapter 7: Configuring Chassis in J Series Services Routers and SRX Series Services Gateways
Table 26: Multicast Snooping Options Configuration Details
Task
Establish multicast
snooping option values.
Establish a list of flood
group addresses for
multicast snooping.
Configure multicast
forwarding cache properties.
Establish the graceful
restart duration for
multicast snooping.
Your Action
1. Click Add new entry next to Domain.
2. Click Multicastsnooping Options next to domain.
1. Click Flood Groups next to Multicast Snooping Options.
2. Click Add new entry next to Flood Groups.
3. In the dialog box, enter the IP addresses.
1. Click Forwarding Cache next to Multicast Snooping Options.
2. In the Comment box, enter the comments.
3. Expand Forwarding Cache.
4. Click Threshold next to Forwarding Cache.
5. In the Comment box, enter the comments.
6. From the Suppress list, select the threshold value for a
forwarding cache.
Range: 1 through 200,000
7. From the Reuse list, select the reuse value for the threshold.
The reuse value must be less than the suppression threshold
value.
Range: 1 through 200,000
1. Click Graceful Restart next to Multicast Snooping Options.
2. In the Comment box, enter the comments.
3. From the Restart Duration list, select the duration for graceful
restart.
Range: 0 to 300 seconds
Default : 180 seconds
41