Juniper NETWORK AND SECURITY MANAGER 2010.4 - CONFIGURING J SERIES SERVICES ROUTERS AND SRX SERIES SERVICES GATEWAYS GUIDE REV Manual page 280

Configuring J Series Services Routers and SRX Series Services Gateways Guide
Table 165: Resource Limits Configuration Details
Option Function
Name Specifies the name of the package or the process resource
limit.
Comment Supplies a descriptive comment for the package or the
process resource limit.
package/process > Resources
Enable Feature Specifies that you can enable the package or the process
resources configuration feature.
Comment Supplies a descriptive comment for the package or the
process resources.
package/process > Resources > Cpu
Comment Supplies a descriptive comment for the CPU.
Priority Specifies the highest priority level that the process can
run.
Time Specifies the maximum amount of CPU time that can be
accumulated.
package/process > Resources > File
Comment Supplies a descriptive comment for the file.
Size Specifies the maximum size of a file that can be created.
Open Specifies the maximum number of simultaneous open
files.
Core Size Specifies the maximum size of a core file that can be
created.
package/process > Resources > Memory
Comment Supplies a descriptive comment for the memory.
256
OK—Saves the changes.
Cancel—Cancels the modifications.
Apply—Applies the resource limits settings.
NOTE: You can configure a package or a process resource limit feature from
the below table.
Your Action
Enter a name.
(Optional) Enter a comment.
Select the Enable Feature check box to
enable this feature.
(Optional) Enter a comment.
(Optional) Enter a comment
Set the priority value. Range:
-2147483648 - 2147483647.
Set the CPU time. Range: 0 - 2147483647.
(Optional) Enter a comment.
Enter the file size.
Set the number of open files. Range: 0 -
2147483647.
Enter the core file size.
(Optional) Enter a comment.
Copyright © 2010, Juniper Networks, Inc.