Juniper NETWORK AND SECURITY MANAGER 2010.4 - CONFIGURING J SERIES SERVICES ROUTERS AND SRX SERIES SERVICES GATEWAYS GUIDE REV Manual page 199

Table 116: Peer Configuration Details (continued)
Option
hex
ascii
Peer > Ip Address > Spi > Replay Method
Comment
Peer > Ip Address > Spi > Replay Method >
None
timestamp
none (configuration)
Peer > Nai
Name
Comment
Peer > Nai > Spi
Name
Comment
Peer > Nai > Spi > Algorithm
Comment
none
hmac-md5
Copyright © 2010, Juniper Networks, Inc.
Chapter 13: Configuring Services for J Series Services Routers and SRX Series Services Gateways
Function
Enables hexadecimal text key.
Enables ASCII text key.
Specifies the comment for the replay method.
Timestamp
Specifies that the timestamp option is not enabled
Enables the timestamp option.
Specifies that the configuration option is not
selected.
Specifies the name for the NAI.
Specifies the comment for the NAI.
Specifies the SPI value.
Specifies the comment for the SPI value.
Specifies the comment for the algorithm.
Specifies that neither the hmac-md5 or md5 option
is specified for the algorithm.
Specifies hash algorithm that authenticates packet
data.
Your Action
1. Select the option.
2. Enter a comment and a hexadecimal
value.
1. Select the option.
2. Enter a comment and ASCII value.
Enter a comment.
Select the option.
1. Select the option.
2. Enter a comment for the timestamp.
3. Enter the timestamp receive duration.
Range: 1 through 255.
Select the option.
Enter a name in the following format:
@domain.com
user@domain.com
Enter a comment.
Enter the SPI value in hexadecimal format.
(0–9, a-f, A-F).
Enter a comment.
Enter a comment.
Select the option.
Select the option.
175