Konica Minolta bizhub 40P/40PX Reference Manual page 154

5
In Administrator mode of PageScope Web Connection, select NetWare
from the Network tab, and then specify the following settings.
–
Netware Print: Select Enable.
–
Frame Type:
Select Auto. (Select the frame type according to the network envi-
ronment.)
–
Mode: Select NPrinter/RPrinter.
–
Printer Name:
Specify the printer name. (Default: BH40P-XXXXXX)
–
Printer Number:
Specify the printer number (0-255). When 255 is specified, the set-
ting is Auto.
6
Restart the printer (turn the printer off, then on again)
7
Use the NetWare server console to load PSERVER.NLM.
8
Use the NetWare server console to display the print server screen, and
then check that created printer is shown as Waiting for Job for the con-
nected printer (0).
136 Printing With NetWare