Konica Minolta bizhub 40P/40PX Reference Manual page 151

Bizhub 40p reference guide

Hide thumbs Also See for bizhub 40P/40PX:

Table of Contents

In Administrator mode of PageScope Web Connection, select Net Ware

from the Network tab, and then specify the following settings.

Netware Print: Select Enable.

Select Auto. (Select the frame type according to the network envi-

Mode: Select NPrinter/RPrinter.

Printer Name:

Specify the printer name. (Default: BH40P-XXXXXX)

Printer Number:

Specify the printer number (0-255). When 255 is specified, the set-

ting is Auto.

Restart the printer (turn the printer off, then on again).

Use the NetWare server console to display the print server screen, and

then check that the created printer is shown as Waiting for Job for the

connected printer (0).

Printing With NetWare

Troubleshooting