Konica Minolta bizhub 40P/40PX Reference Manual page 327

Item
IP Address*
Subnet Mask*
Default Gateway* If a router is used on the network, sets the router's
Apply button
Clear button
* Always enter these addresses without leading zeros. For example,
131.011.010.001 should be entered as 131.11.10.1.
Configuring the Printer
Description
Sets the printer's IPv4 address.
Range: 0–255 for each xxx triplet
Default: 0.0.0.0
If the specified IPv4 address is outside of the
allowable range, the value is not changed, even
after the Apply button is clicked. The setting
returns to the previous value.
Configuration Menu Equivalent:
INTERFACE MENU - ETHERNET - TCP/
IP - IP ADDRESS
Sets the printer's subnet mask address.
Range: 0–255 for each xxx triplet
Default: 0.0.0.0
If the specified subnet mask address is outside of
the allowable range, the value is not changed, even
after the Apply button is clicked. The setting
returns to the previous value.
Configuration Menu Equivalent:
INTERFACE MENU - ETHERNET - TCP/
IP - SUBNET MASK
address.
Range: 0–255 for each xxx triplet
Default: 0.0.0.0
If the specified router address is outside of the
allowable range, the value is not changed, even
after the Apply button is clicked. The setting
returns to the previous value.
Configuration Menu Equivalent:
INTERFACE MENU - ETHERNET - TCP/
IP - DEFAULT GATEWAY
Applies the configuration settings for this window.
Resets all configuration settings to previous values.
309