Table of Contents
Advertisement
Installing the Switch in a Rack
For mounting the switch in a standard 19-inch rack, you need the following tools and materials:
•
Two mounting brackets supplied in the Rack Mount Kit
•
Eight screws supplied in the Rack Mount Kit to attach the mounting brackets to the switch
•
Four screws and nylon washers supplied in the Rack Mount Kit to attach the mounting
brackets to the rack
•
#1 Phillips screwdriver
•
#2 Phillips screwdriver
To install the switch in a rack, follow these steps:
Attach the mounting brackets to the sides of the switch as illustrated in
1.
Hold a mounting bracket against each side of the switch and align the countersunk screw holes
in the bracket with the bracket mounting holes in the switch.
Insert the screws provided in the Rack Mount Kit through each bracket and into the
2.
bracket mounting holes in the switch.
Using a #1 Phillips screwdriver, tighten the screws to secure each bracket.
3.
Hold the switch with the mounting holes in the brackets aligned with the holes in the
4.
rack.
Figure 4-1.
Attaching mounting brackets to the Model SW510 and
Model SW518 switches
Installation
Installation Guide for the Model SW510 and Model SW518 Ethernet Switches
Figure
4-1.
597EA
4-3
Advertisement
Table of Contents
