Step 2: Installing The Switch; Installing The Switch On A Flat Surface; Installing The Switch In A Rack - NETGEAR FS752TP Hardware Installation Manual

Characteristics Requirements
Circuit Consideration should be given to the connection of the equipment to the supply circuit
Overloading and the effect that overloading of the circuits might have on overcurrent protection and
supply wiring. Appropriate consideration of equipment nameplate ratings should be used
when addressing this concern.
Reliable Reliable earthing of rack-mounted equipment should be maintained. Particular attention
Earthing should be given to supply connections other than direct connections to the branch circuit
(e.g. use of power strips).

Step 2: Installing the Switch

The FS752TP can be used on a flat surface or mounted in a standard network equipment
rack.

Installing the Switch on a Flat Surface

The switch ships with four self-adhesive rubber footpads. Stick one rubber footpad on each of
the four concave spaces on the bottom of the switch. The rubber footpads cushion the switch
against shock and vibrations. They also provide ventilation space between stacked switches.

Installing the Switch in a Rack

To install the switch in a rack, you need the 19-inch rackmount kit supplied with the switch.
1. Attach the supplied mounting brackets to the side of the switch.
2. Insert the screws provided in the rackmount kit through each bracket and into the bracket
mounting holes in the switch.
3. Tighten the screws with a #1 Phillips screwdriver to secure each bracket.
4. Align the mounting holes in the brackets with the holes in the rack, and insert two pan-head
screws with nylon washers through each bracket and into the rack.
5. Tighten the screws with a #2 Phillips screwdriver to secure mounting brackets to the rack.
Figure 5. Rack Mount
FS752TP Smart Switch
Installation
21