Physical Description; Front Panel; Figure 2-1. Front Panel Of The Model Sw510 Switch - NETGEAR SW518 - Switch Installation Manual

This chapter explains the hardware features of the NETGEAR Model SW510 and Model SW518
Ethernet switches. It is divided into sections explaining the front and rear panels of the switches.
Use the key at the bottom of each illustration to identify the panel components.

Front Panel

For easier management and control of the switches, familiarize yourself with the ports, LEDs, and
Normal/Uplink push button switches, as illustrated in
panels of the switches.
2
1
10
PORT
Ethernet Switch
10/100Mbps
Power 1 2 3 4 5 6 7 8
Green = Rx/Tx Yellow = Collision
Key:
1 = Power LED
2 = Rx/Tx and Collision LEDs for ports 1 through 10
3 = 100 Mbps LEDs for ports 9 and 10
4 = 10 Mbps Ethernet ports1 through 8 with Link and FDX LEDs on each port
5 = Normal/Uplink push button to configure port 8
6 = 10/100 Mbps Ethernet ports 9 and 10 with Link and FDX LEDs on each port
7 = Normal/Uplink push button to configure port 10
Figure 2-1. Front panel of the Model SW510 switch

Physical Description

3
1 2 3
Link FDX
100Mbps
9 10
Physical Description
Figure 2-1
4
10/100 Mbps
4
5 6 7
Chapter 2
and Figure 2-2 showing the front
5 6
MODEL
10/100 Mbps
9 10
8
Link FDX Link FDX
Normal/Uplink Normal/Uplink
7
SW510
592EA
2-1