JunosE 11.2.x System Event Logging Reference Guide
oam3ahAssociations
Description
Emergency
Alert
Critical
Error
Warning Log
Notice Log
Info
Debug
Filter
oam3ahEvents
Description
Emergency
Alert
Critical
Error
164
ospfv3PktsRcvd on page 182
ospfv3PktsSent on page 183
ospfv3Route on page 183
ospfV3SpfExt on page 184
ospfV3SpfInter on page 184
ospfV3SpfIntra on page 185
802.3ah OAM association details for link-fault management between a local and remote
OAM peer
None
OAM association with the remote peer is lost
None
None
None
The MAC address of the peer identified during the discovery process
None
None
None
802.3 OAM link-fault management event details about problems detected on the link
None
Link is disabled because the high threshold for an error is exceeded on the Ethernet OAM
interface or because of the error-disable action specified to be performed in response
to an OAM PDU received from a remote peer for a fault in the receive path of the link
None
Link is disabled because the high threshold for an error is exceeded on the Ethernet OAM
interface or because of the error-disable action specified to be performed in response
to an OAM PDU received from a remote peer for a fault in the receive path of the link
Copyright © 2010, Juniper Networks, Inc.
Need help?
Do you have a question about the JUNOSE SOFTWARE 11.2.X - SYSTEM EVENT LOGGING REFERENCE GUIDE 6-29-2010 and is the answer not in the manual?
Questions and answers