Juniper JUNOSE SOFTWARE 11.2.X - SYSTEM EVENT LOGGING REFERENCE GUIDE 6-29-2010 Reference Manual page 217

Info
Debug
Filter 1
Filter 2
pimIpv6AutoRPSentLog
Description
Emergency
Copyright © 2010, Juniper Networks, Inc.
Short description of received PIM AutoRP packets
Complete print of received PIM AutoRP packets
interface-ipv6-address [ ipv6-address ipv6Address | unnumbered interfaceType
interfaceSpecifier ]
interface-ipv6-address—Logs events for a specific interface
ipv6-address—Specifies that you will identify the interface by entering an IPv6 address
ipv6Address—IPv6 address of interface for which you want to log events
unnumbered—Specifies that the interface is unnumbered
interfaceType—Type of interface for which you want to log events
interfaceSpecifier—Location of unnumbered interface in the appropriate format
NOTE: For information about interface types and specifiers, see Interface Types and
Specifiers in JunosE Command Reference Guide.
router virtualRouterName [ interface-ipv6-address [ ipv6-address ipv6Address |
unnumbered interfaceType interfaceSpecifier ] ]
router—Logs events for a specific virtual router
virtualRouterName—Name of virtual router for which you want to log events
interface-ipv6-address—Logs events for a specific interface on the virtual router
ipv6-address—Specifies that you will identify the interface by entering an IPv6 address
ipv6Address—IPv6 address of interface for which you want to log events
unnumbered—Specifies that the interface is unnumbered
interfaceType—Type of interface for which you want to log events
interfaceSpecifier—Location of unnumbered interface in the appropriate format
NOTE: For information about interface types and specifiers, see Interface Types and
Specifiers in JunosE Command Reference Guide.
Protocol Independent Multicast (PIM) AutoRP messages sent
None
Chapter 15: P Commands
193